AkvaVIS
AkvaVIS G — elastic polyurethane injection gel
Hydroactive polyurethane gel for injecting cracks, cold and expansion joints and anti-seepage curtains in soil; gels in 190±60 s.
Price on request
AkvaVIS
AkvaVIS S402 — polyurethane injection system: foam and resin
Dual purpose sets AkvaVIS S402 apart: on its own the compound works as a one-component foam that expands 10–15 times on contact with water, and mixed with component A at 100 : 100 by mass it becomes an elastic resin with a viscosity of 70–100 mPa·s. The system is used to eliminate water inflow, seal joints and cracks, construct and repair expansion joints, fill voids and consolidate soils behind tunnel linings. The resin remains elastic at sub-zero temperatures, and its pot life is 60 min. Kit A+B — 40 kg.
Specifications
| Manufacturer | AkvaVIS — OOO “GELIOS” |
|---|---|
| Type | injection waterproofing |
| Use | foundations and basements, tunnels and metro, tanks and pools, joints and junctions, leak repair |
| Base | two-component polyurethane injection system: AkvaVIS S402 — one-component foam; with component A — elastic resin |
| Packaging | 20 + 20 kg, kit (A+B) 40 kg |
| Application method | foam — with a one-component pump; resin — mixing S402 with component A 100 : 100 by mass (0.91 : 1 by volume) with a mixer at 300 rpm for at least 3 min; for expansion joints an activator can be added and a two-component pump used; use opened packaging within 24 h; material temperature preferably +15…+25 °C |
| Application temperature | above +3 °C |
| Curing | resin pot life 60 min |
| Key properties | S402: viscosity 500–600 mPa·s, density 1.10–1.12 g/cm³, expansion on contact with water 10–15 times; mix of S402 + comp. A: viscosity 70–100 mPa·s, density 1.05 g/cm³; elastic at sub-zero temperatures |
| Consumption | seepage behind the lining: loams with pressurised water (Kf up to 36 m/day) — 12–16 kg/m²; silty sands and sandy loams (Kf 0.05–1.2 m/day) — 8–9 kg/m² |
| Shelf life | storage stability 6 months; storage at +10…+25 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by AkvaVIS
AkvaVIS
AkvaVIS S401 — very elastic polyurethane injection resin
Elastic resin for injecting cracks, joints and penetrations in reinforced concrete, including through injection hoses; tensile strength at break 11 MPa.
Price on request
AkvaVIS
AkvaVIS S400 — elastic polyurethane injection resin
Low-viscosity resin for sealing dry and damp cracks and joints in reinforced concrete and cut-off waterproofing of masonry; penetrates cracks from 0.2 mm.
Price on request
AkvaVIS
AkvaVIS PM — polyurethane injection foam with activator
Elastic hydroactive foam with activator for sealing joints, cracks and voids under dynamic loads; reacts with alkaline water up to pH 13.
Price on request
AkvaVIS
AkvaVIS P — two-component polyurethane foam for stopping leaks
Hydroactive polyurethane foam for stopping active leaks through cracks, joints and service penetrations; expands up to 30 times with water.
Price on request
AkvaVIS
AkvaVIS P TIKS — accelerated polyurethane foam for emergency leaks
Three-component accelerated foam for emergency stopping of active water inflow through joints, cracks and voids; with water the reaction starts after 20 s.
Price on request