AkvaVIS
AkvaVIS S400 — elastic polyurethane injection resin
Low-viscosity resin for sealing dry and damp cracks and joints in reinforced concrete and cut-off waterproofing of masonry; penetrates cracks from 0.2 mm.
Price on request
AkvaVIS
AkvaVIS G — elastic polyurethane injection gel
A gel, not a foam: AkvaVIS G is a one-component elastic hydroactive solvent-free polyurethane compound that does not shrink in a water-saturated environment and reversibly changes volume as the water level fluctuates. It is injected into cracks, cold and expansion joints of reinforced concrete and service penetrations, and is used for cut-off waterproofing, anti-seepage curtains in the soil behind structures and consolidation of loose soils. The highly elastic gel withstands dynamic loads; work is carried out at temperatures above +5 °C.
Specifications
| Manufacturer | AkvaVIS — OOO “GELIOS” |
|---|---|
| Type | injection waterproofing |
| Use | foundations and basements, tunnels and metro, tanks and pools, joints and junctions, leak repair |
| Base | one-component elastic hydroactive polyurethane injection gel, solvent-free |
| Packaging | pails, canisters of 10, 20, 25, 60 kg |
| Application method | with active water ingress, first stop the leak with a plugging compound; drill holes to 2/3–3/4 of the structure thickness at 30–45°, 20–25 cm spacing in a staggered pattern; Ø10 mm metal packers; one-component piston pump; pre-wet a dry substrate with water; after polymerisation remove the packers and plug the holes |
| Application temperature | above +5 °C |
| Curing | gel time 190±60 s |
| Key properties | viscosity without water 800–1000 mPa·s, with water 1 : 10 — 3–50 mPa·s (20 °C); density 1.12±0.03 g/cm³; highly elastic gel, withstands dynamic loads; non-shrinking in a water-saturated environment, the volume change with fluctuating water level is reversible |
| Shelf life | 12 months in a dry warm place in the original packaging at +10…+25 °C |
| Standards | STO 69626291-001-2012; included in the Moscow Territorial Construction Catalogue (MTSK); in the List of Innovative Products of the Moscow Innovation Agency (letter No. AIM-01-07-295/21 of 12.05.2021); TSN-2001.1 item 1.1-1-4108; positive opinion of OAO “TsNIIS”, Research Centre “Tunnels and Metros” |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by AkvaVIS
AkvaVIS
AkvaVIS S404 — polyurethane resin for consolidating soils and rocks
Two-component polyurethane resin for consolidating soils and rocks, sealing off groundwater and strengthening foundations; three versions.
Price on request
AkvaVIS
AkvaVIS P — two-component polyurethane foam for stopping leaks
Hydroactive polyurethane foam for stopping active leaks through cracks, joints and service penetrations; expands up to 30 times with water.
Price on request
AkvaVIS
AkvaVIS P1K — one-component polyurethane injection foam
Fast-curing one-component foam for eliminating water inflow, sealing joints and filling voids behind tunnel linings; reaction with water in 60 s.
Price on request
AkvaVIS
AkvaVIS S401 — very elastic polyurethane injection resin
Elastic resin for injecting cracks, joints and penetrations in reinforced concrete, including through injection hoses; tensile strength at break 11 MPa.
Price on request
AkvaVIS
AkvaVIS P TIKS — accelerated polyurethane foam for emergency leaks
Three-component accelerated foam for emergency stopping of active water inflow through joints, cracks and voids; with water the reaction starts after 20 s.
Price on request