AkvaVIS
AkvaVIS P1K — one-component polyurethane injection foam
Fast-curing one-component foam for eliminating water inflow, sealing joints and filling voids behind tunnel linings; reaction with water in 60 s.
Price on request
AkvaVIS
AkvaVIS P TIKS — accelerated polyurethane foam for emergency leaks
The accelerated AkvaVIS P TIKS system consists of components A and B of AkvaVIS P foam and the TIKS catalyst: with water the reaction starts after 20 s, without water — after 40 s at 20 °C, and it lasts 3 min. The compound is designed for emergency stopping of active water inflow, filling joints, cracks wider than 0.2 mm and voids, and consolidating loose soils. In contact with water the foam expands up to 30 times, without water — up to 2 times. The kit weighs 57 kg and includes 2 l of catalyst.
Specifications
| Manufacturer | AkvaVIS — OOO “GELIOS” |
|---|---|
| Type | injection waterproofing |
| Use | foundations and basements, tunnels and metro, leak repair |
| Base | three-component hydroactive accelerated polyurethane injection foam: components A and B — AkvaVIS P system, component S — TIKS catalyst |
| Packaging | kit (A+B+catalyst) 57 kg: 25 + 30 kg + TIKS catalyst 2 l |
| Application method | injection with a one-component pump; A : B ratio 1 : 1.2 by mass (1 : 1 by volume) |
| Curing | reaction start without water 40 s, with water 20 s (20 °C); reaction duration 3 min |
| Key properties | maximum expansion ratio with water 30, without water 2; mix density 1150 kg/m³ (20 °C); compressive strength (DIN EN 12390-3) 74 MPa; for cracks wider than 0.2 mm |
| Standards | STO 69626291-001-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by AkvaVIS
AkvaVIS
AkvaVIS G — elastic polyurethane injection gel
Hydroactive polyurethane gel for injecting cracks, cold and expansion joints and anti-seepage curtains in soil; gels in 190±60 s.
Price on request
AkvaVIS
AkvaVIS PM — polyurethane injection foam with activator
Elastic hydroactive foam with activator for sealing joints, cracks and voids under dynamic loads; reacts with alkaline water up to pH 13.
Price on request
AkvaVIS
AkvaVIS S401 — very elastic polyurethane injection resin
Elastic resin for injecting cracks, joints and penetrations in reinforced concrete, including through injection hoses; tensile strength at break 11 MPa.
Price on request
AkvaVIS
AkvaVIS S402 — polyurethane injection system: foam and resin
Polyurethane compound that works as a foam for stopping water inflow and, with component A, as an elastic resin; expands 10–15 times with water.
Price on request
AkvaVIS
AkvaVIS S400 — elastic polyurethane injection resin
Low-viscosity resin for sealing dry and damp cracks and joints in reinforced concrete and cut-off waterproofing of masonry; penetrates cracks from 0.2 mm.
Price on request