Kristallizol W12-Kistevoy — brush-applied penetrating waterproofing
Penetrating waterproofing applied by brush or roller to new concrete without water seepage; water-tightness W12.

Kristallizol water repellent is supplied as a concentrate based on methyl siliconates: a litre of it is poured, while stirring, into 30 l of clean water, and after 5–10 min the impregnation is ready. It is applied by brush, roller or sprayer to dry concrete, brick, gypsum, wood, plaster and facades to protect them from atmospheric moisture and capillary suction. The impregnation does not form a surface film, so the material retains its vapour permeability, colour and texture while starting to repel water and dirt. Through injectors, the compound is also used for cut-off waterproofing of brick masonry.
| Manufacturer | Kristallizol — OOO “PK GidroStroyKomplekt”, Mikhaylov |
|---|---|
| Type | waterproofing material |
| Use | foundations and basements |
| Base | aqueous solution based on methyl siliconates (concentrate) |
| Packaging | 1 l PE canister |
| Application method | while stirring continuously, pour 1 l of concentrate into 30 l of clean water at room temperature, the solution is ready after 5–10 min; apply to a dry surface in 1–2 coats (the second onto the still-wet first) by brush, roller or sprayer, without puddles; work in dry weather; cut-off waterproofing of brick masonry: injectors above ground level in two staggered rows every 10–15 cm, injection in two stages with a one-day break, at moisture below 60 % — by gravity, impregnation without pressure for 8 h or more, caulk the holes with Kristallizol W12-Kistevoy, Shovny, Remontny or W12 |
| Application temperature | at least +5 °C |
| Key properties | does not form a surface film, retains vapour permeability, colour and texture; high chemical and weather resistance; water- and dirt-repellent; fire-safe |
| Consumption | 1 l of concentrate per 155 m² |
| Shelf life | at least 12 months; store in covered dry rooms, protect from freezing |
| Standards | TU 5745-002-38213907-11 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Penetrating waterproofing applied by brush or roller to new concrete without water seepage; water-tightness W12.
Penetrating cement waterproofing for foundations, basements, tanks and hydraulic structures; water-tightness W12.
Rapid-hardening hydraulic plug for stopping pressurised leaks through cracks, joints and service openings; sets in 3 min.
Liquid concrete activator used after chemical cleaning with Kristallizol KHIMFREZ; increases the bond of a new layer by 1.5–3 times.
Integral admixture for concrete mix that raises the water-tightness grade of concrete by 5 steps; for concrete from M150.
Penetrating repair plaster for restoring concrete and brick masonry with simultaneous waterproofing; water-tightness W8.