VMP
VINIKOR-63 — colourless vinyl priming varnish for concrete
Colourless vinyl varnish for priming the concrete of bridges and industrial structures under VINIKOR-62 enamel; overcoating after 2 h.
Price on request
VMP
ALUMOTERM — heat-resistant silicone coating with aluminium powder
ALUMOTERM is a one-pack silicone varnish with aluminium powder that forms a smooth, glossy silver coating. It is designed for long-term service at temperatures up to 350 °C (short-term up to 400 °C) on equipment and steel structures in oil and gas and power. It is applied as a finish over TSINOTERM or on its own; for optimum properties the coating is heated to 150 °C. Work is carried out at air temperatures from −15 °C, and the material is included in the register of JSC NK Rosneft.
Specifications
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | heat-resistant coatings |
| Use | steel structures, equipment, oil and gas, power industry |
| Base | heat-resistant silicone varnish with aluminium powder; one-pack |
| Colour | silver, glossy, smooth |
| Packaging | metal pails or metal cans |
| Application method | airless spray (nozzle 0.011–0.017″, 10–15 MPa), air spray, brush, roller; thinner 646 or xylene up to 15 % by weight (working viscosity 14–18 s) |
| Application temperature | air from −15 to +40 °C, relative humidity up to 85 % |
| Drying | to degree 3 — no more than 30 min at 20 °C; over TSINOTERM — not earlier than 2 h; for optimum properties — heating to 150 °C with a hold of at least 3 h; before service in an aggressive gaseous environment — heat curing |
| Key properties | heat resistance of the coating — 350 °C; long-term service up to 350 °C (short-term up to 400 °C), non-volatile matter by weight — 39–44 %, density — 1.0–1.1 g/cm³, adhesion (GOST 31149) — max. 1 point, impact strength — at least 50 cm, coating class (GOST 35094) — IV |
| Compatible materials | TSINOTERM + ALUMOTERM; may be used as a stand-alone coating |
| Shelf life | 6 months from the date of manufacture |
| Standards | TU 20.30.12-020-12288779-2026; register of JSC NK Rosneft |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by VMP
VMP
VM-6233R — epoxy powder for factory pipe coating
A factory material: epoxy powder that pipe plants spray onto a heated pipe as a single coat or as the first coat of a system.
Price on request
VMP
TSINOTAN — one-component zinc-rich polyurethane primer
Moisture-curing zinc-rich primer for steel structures, bridges and marine structures, applied at air temperatures from −15 °C.
Price on request
VMP
VINIKOR-061 — vinyl-epoxy primer under VINIKOR-62 enamel
Vinyl-epoxy primer for bridges, oil and gas, power and port facilities; oil- and petrol-resistant, applied down to −10 °C.
Price on request
VMP
PLAMCOR-1 water-based fire-retardant paint for steel structures (VMP)
Water-dispersion intumescent paint for fire protection of steel structures indoors: vinyl acetate base, performance of 45, 60 and 90 minutes.
Price on request
VMP
TSINOL — one-component cold galvanising compound
Cold galvanising compound for steel structures, bridges and the power industry: 96 % zinc in the dry coating, applied down to −25 °C.
Price on request