Elcon
KO-870 Elcon — heat-resistant enamel up to +700 °C for steel structures and concrete
One-component silicone enamel for steel structures and equipment up to +700 °C, also suitable for concrete, brick and reinforced concrete.
Price on request
Elcon
Elcon Zintech 96 cold galvanising compound — 96 % zinc in the dry film
The most highly filled version of the range: the dry film of Elcon Zintech 96 contains 96 % zinc, and the binder is modified epoxy ester resin with spherical zinc. The compound is intended for industrial construction, the oil and gas sector, the power industry, port and hydraulic structures, power line towers, bridge piers and decks, and road safety barriers. Work is permitted from −20 °C to +40 °C, a coat dries to degree 3 in not more than 1 h at 20 °C; it is used on its own or under topcoats.
Specifications
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | cold galvanising compounds |
| Use | steel structures, bridges, equipment, oil and gas, power industry, marine and port structures |
| Base | one-component zinc-rich primer on modified epoxy ester resin; spherical zinc; aromatic solvents |
| Colour | grey |
| Packaging | 20 kg; 1 kg; aerosol 520 ml |
| Application method | air spray, roller, brush; several coats with intercoat drying to “tack-free” from 0.5 h; surface preparation St 3 (Zintech 60 and 96 — St 3 or Sa 2–Sa 2.5), degreasing; thinner Elcon R, o-xylene, toluene (not more than 5 %) |
| Application temperature | from −20 °C to +40 °C; relative humidity not more than 80 % |
| Drying | to degree 3 — not more than 1 h at 20 °C; full cure at least 24 h; at sub-zero temperatures the intercoat interval is 2–3 times longer; installation — not earlier than 3 days |
| Key properties | Zinc content in the dry film: 96 %, Non-volatile matter by weight: at least 79 %, Density: 2.40–2.70 g/cm³, Adhesion: not more than 1 point, Resistance to static exposure at 20 °C: water 100 h, 3 % NaCl 100 h |
| Compatible materials | stand-alone coating or primer under topcoats |
| Shelf life | 20 kg — 18 months; 1 kg — 24 months; aerosol — 36 months; storage from −30 °C to +40 °C |
| Standards | TU 2312-018-49222195-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Elcon
Elcon
KO-8101 Elcon — heat-resistant enamel up to +700 °C for pipelines and the power industry
Silicone enamel for oil, steam and gas pipelines, chimneys and equipment; applied without primer, the black version withstands up to +700 °C.
Price on request
Elcon
Elcon AL anticorrosion weather-resistant enamel — topcoat with flake aluminium
Silver barrier enamel with flake aluminium for steel structures and equipment; topcoat over Elcon Zintech zinc primer.
Price on request
Elcon
Elcon Zintech 60 cold galvanising compound — fast-drying zinc primer
Fast-drying zinc-rich primer for steel structures, bridges, oil and gas and power equipment; applied down to −15 °C.
Price on request
Elcon
Elcon Max Therm heat-resistant enamel — polyorganosiloxane enamel up to +1,200 °C
One-component polyorganosiloxane enamel for steel structures, pipelines and power equipment; the black version withstands up to +1,200 °C.
Price on request
Elcon
Elcon Zintech cold galvanising compound — one-component zinc primer
Zinc-rich epoxy ester primer for sacrificial protection of metal in soil and atmosphere; more than 1,440 h in a salt spray chamber without corrosion.
Price on request