REKS
REKS® Graut M — flowable non-shrink R4 grout for machine bases and anchors
Non-shrink highly flowable cementitious mix for grouting machine bases, fixing beams and columns and setting anchors; 60 MPa at 28 days.
Price on request
REKS
REKS® Tikso — thixotropic mortar for repairing and levelling concrete and floors
Repair and final finishing of concrete and reinforced concrete structures and levelling of surfaces in routine repair and new construction are carried out with REKS® Tikso. The non-shrink fibre-reinforced mortar with an aggregate size of 0.63 mm repairs dormant cracks with an opening of up to 1 mm, protects concrete against media containing sulphates, sulphides and chlorides, and is suitable for local levelling of floors under light and medium loads. Flowability is retained for at least 60 minutes, compressive strength at 28 days is from 40 MPa, water impermeability W16.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, tanks and treatment plants, tunnels and metro, floors |
| Base | non-shrink fibre-reinforced thixotropic cementitious mortar for repair and levelling of concrete surfaces |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | repair and final finishing of concrete and reinforced concrete structures; levelling of concrete surfaces in routine repair and in new construction; repair of dormant cracks with an opening of up to 1 mm; protection of concrete against aggressive media containing sulphates, sulphides, chlorides, etc.; local levelling of floors in civil and industrial buildings subject to light and medium loads |
| Key properties | modulus of elasticity: ≥15,000 MPa; density of hardened mortar: 2.0 ± 5 % t/m³; freeze-thaw resistance: F2 300; bond to substrate at 28 days: ≥1.5 MPa; water impermeability: W16; compressive strength at 28 days: ≥40 MPa; flexural strength at 1 day: ≥2.5 MPa; flexural strength at 28 days: ≥7 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥2 MPa; aggregate size: 0.63 mm; flowability (truncated cone spread on a flow table): 125–135 mm; flowability retention: ≥60 minutes; compressive strength at 1 day: ≥10 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵); sulphate resistance coefficient (365 days): 0.9 % |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Strukto R3 — rapid-setting class R3 mortar for repair and levelling
Non-shrink fibre-reinforced R3 mortar for repair, finishing and local levelling of concrete, including precast elements; 35 MPa at 28 days.
Price on request
REKS
REKS® Strukto 70 — thixotropic R4 repair mortar, 70 MPa, W20
Fibre-reinforced R4 repair mortar for bridges, dams, tunnels and columns with compressive strength from 70 MPa and water impermeability W20.
Price on request
REKS
REKS® Epolit — three-component epoxy grout for anchor pockets and equipment
Highly filled cold-curing epoxy for filling anchor pockets and grouting under turbines, compressors and pumps; 100 MPa in 7 days.
Price on request
REKS
REKS® AR — thixotropic R4 repair mortar for spraying and trowel application
Non-shrink fibre-reinforced R4 mortar in 25 kg bags for repairing bridges, tunnels, dams and columns; compressive strength from 55 MPa at 28 days.
Price on request
REKS
REKS® BS — thixotropic R3 mortar for final levelling of concrete
Non-shrink class R3 mortar for a smooth finish on new and repair of old concrete surfaces before protective coatings; aggregate size 0.315 mm.
Price on request