REKS
REKS® Strukto 60 — fibre-reinforced thixotropic R4 repair mortar, 60 MPa
Non-shrink fibre-reinforced R4 mortar for repairing bridges, tunnels, dams and columns; compressive strength at 28 days at least 60 MPa.
Price on request
REKS
REKS® OL — lightweight thixotropic R3 mortar for repairing soffits
The density of hardened REKS® OL is only 1.5 t/m³, so this non-shrink thixotropic mortar is chosen for overhead concrete surfaces and extensive damage where a low weight of the repair material matters. The mortar belongs to class R3 per GOST R 56378 and is used to repair elements of concrete and reinforced concrete structures in industrial buildings, on columns, beams, tanks and treatment plants. At 28 days compressive strength is at least 35 MPa and bond to the substrate from 1.5 MPa; packed in 20 kg bags.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams, tanks and treatment plants |
| Base | non-shrink lightweight thixotropic cementitious mortar for repair of overhead surfaces |
| Colour | grey |
| Packaging | bags 20 kg |
| Application method | repair of damaged elements of concrete and reinforced concrete structures; restoration of overhead concrete surfaces, as well as extensive concrete damage where the use of a lightweight material is essential |
| Application temperature | +5…+30 °C |
| Key properties | modulus of elasticity: ≥15,000 MPa; density of hardened mortar: 1.5 ± 5 % t/m³; freeze-thaw resistance: F2 200; bond to substrate at 28 days: ≥1.5 MPa; water impermeability: W16; compressive strength at 28 days: ≥35 MPa; flexural strength at 1 day: ≥1.5 MPa; flexural strength at 28 days: ≥4.5 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥1.5 MPa; aggregate size: 1.25 mm; flowability (truncated cone spread on a flow table): 140–150 mm; flowability retention: ≥20 minutes; compressive strength at 1 day: ≥10 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵) |
| Shelf life | 12 months from the date of manufacture |
| Standards | class R3 per GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® AKRILIK NV — compound for deep impregnation and strengthening of cracked concrete
Impregnating compound of components A and B for restoring the load-bearing capacity of concrete and repairing track concrete; tensile strength from 20 MPa.
Price on request
REKS
REKS® Fiks Epo T/VN ESh — two-component epoxy grout, 98 MPa in 7 days
Two-component high-strength epoxy grout for bridge bearings, equipment, rails and anchoring; 27 kg kit, shelf life 16 months.
Price on request
REKS
REKS® Fiks Epo Tiks — epoxy-based chemical anchor for rebar and studs
Two-component epoxy chemical anchor for bonding rebar, anchors and studs of any diameter into B15–B60 concrete, stone and brick.
Price on request
REKS
REKS® AKRILIK ELAST VN — acrylic polymer concrete for expansion joints and slab edges
Rapid-hardening highly filled acrylic polymer concrete with a reduced modulus of elasticity for expansion joints, slab edges and sleepers.
Price on request
REKS
REKS® R3 — class R3 repair mortar, 40 MPa, for interior and exterior work
Non-shrink thixotropic class R3 mortar for local repair and levelling of reinforced concrete in industrial buildings and tanks; compression from 40 MPa.
Price on request