REKS
REKS® Strukto R3 — rapid-setting class R3 mortar for repair and levelling
Non-shrink fibre-reinforced R3 mortar for repair, finishing and local levelling of concrete, including precast elements; 35 MPa at 28 days.
Price on request
REKS
REKS® R4 — mortar for structural repair of reinforced concrete, 60 MPa
Structural repair and restoration of reinforced concrete structures are the main task of REKS® R4, a non-shrink fibre-reinforced thixotropic mortar of class R4 per GOST R 56378. It is used for local repair of damaged and deteriorated elements in interior and exterior work on vertical, horizontal and overhead surfaces — in industrial buildings, on columns, beams and hydraulic structures. Compressive strength is at least 25 MPa after one day and 60 MPa after 28 days, flexural strength at 28 days from 9 MPa, and flowability is retained for at least 45 minutes.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams, hydraulic structures and dams |
| Base | non-shrink fibre-reinforced thixotropic cementitious mortar for repair and levelling of concrete surfaces |
| Colour | grey |
| Packaging | bags 25 kg |
| Application method | structural repair and restoration of reinforced concrete structures; local repair of damaged and deteriorated elements of concrete and reinforced concrete structures; for interior and exterior work, on vertical, horizontal and overhead surfaces |
| Application temperature | +5…+30 °C |
| Key properties | modulus of elasticity: ≥20,000 MPa; density of hardened mortar: 2.25 ± 5 % t/m³; freeze-thaw resistance: F2 300; bond to substrate at 28 days: ≥2.2 MPa; water impermeability: W16; compressive strength at 28 days: ≥60 MPa; flexural strength at 1 day: ≥5 MPa; flexural strength at 28 days: ≥9 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥2.0 MPa; aggregate size: 2.5 mm; flowability (truncated cone spread on a flow table): 110–135 mm; flowability retention: ≥45 minutes; compressive strength at 1 day: ≥25 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵); sulphate resistance coefficient (365 days): 0.982 % |
| Shelf life | 12 months from the date of manufacture |
| Standards | class R4 per GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Nabryzg — fibre-reinforced class R3 mortar for wet spraying
Non-shrink fibre-reinforced class R3 mortar for repairing concrete and reinforced concrete by wet spraying, including in large volumes; from 35 MPa.
Price on request
REKS
REKS® Litoy — pourable R4 grout for bridge bearings and equipment
Low-viscosity non-shrink cementitious mix for high-precision grouting under columns, bridge spans and equipment foundations; 80 MPa at 28 days.
Price on request
REKS
REKS® Torkret — dry mix for shotcreting mine workings and concrete
Ready dry mix for dry shotcreting of mine workings, rock bases and damaged concrete, brick and stone; compression from 45 MPa at 28 days.
Price on request
REKS
REKS® Akva Densit — epoxy compound for underwater repair and damp concrete
Epoxy repair compound for damp surfaces and underwater work on hydraulic, port and bridge structures; compression from 50 MPa.
Price on request
REKS
REKS® Litoy 110 — 110 MPa installation grout for wind turbine towers and equipment
High-strength rapid-hardening Portland cement grout with shrinkage compensators for wind turbines, bridges and equipment; 110 MPa at 28 days.
Price on request