Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
REKS® Fiks Akrep — chemical anchor for installation down to −15 °C
REKS

REKS® Fiks Akrep — chemical anchor for installation down to −15 °C

Chemical anchors

The chemical anchor REKS® Fiks Akrep is designed for work at sub-zero temperatures — down to −15 °C. It is used to bond deformed rebar, anchors, studs of any diameter and embedded parts into concrete of grades B15–B60, reinforced concrete, natural stone and brick in interior and exterior work; the anchor is supplied in 410 ml coaxial cartridges. At a substrate temperature of 0 °C the gel time is 3 minutes, at −5 °C 4.5 and at −15 °C 16.5 minutes; the minimum strength-gain time is 18, 24 and 32 hours, and compressive strength is at least 50 MPa.

Specifications

ManufacturerREKS — OOO “SPS”
Typechemical anchors
Useanchoring of rebar and bolts
Basechemical anchor for sub-zero temperatures
Colourgrey
Packagingcoaxial cartridge of 410 ml supplied with a mixing nozzle.; cardboard box of 24 pcs
Application methodhigh-performance two-component chemical compound specially developed for reliable fixing of deformed rebar, anchors, studs of any diameter and other embedded parts in structures of concrete of grades B15–B60, reinforced concrete, natural stone and brick; intended for interior and exterior work at sub-zero temperatures down to −15 °C; use at lower temperatures is possible, but the gel time and the time to develop strength properties will increase.
Application temperaturesubstrate down to −15 °C (data for −15…0 °C); compound in the cartridge about +20 °C
Key propertiestensile strength: ≥12 MPa; compressive strength: ≥50 MPa; adhesion to metal: ≥3 MPa; gel time at substrate temperature −5 °C: 4.5 min; elongation at break: ≥5 %; gel time at substrate temperature 0 °C: 3 min; gel time at substrate temperature −15 °C: 16.5 min; adhesion to B25 concrete: exceeds the cohesion of concrete; minimum strength-gain time at 0 °C: 18 h; minimum strength-gain time at −5 °C: 24 h; minimum strength-gain time at −15 °C: 32 h
Shelf life10 months from the date of manufacture; storage at +5…+25 °C

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by REKS