Pakol
Pakol Finish — skim-coat mix for finish repair and levelling
Finely dispersed cementitious skim coat for finish repair and levelling of concrete, brick and stone walls and ceilings; bond to substrate 2.8 MPa.
Price on request
Pakol
Pakol Remontny 400 M — fine-grained thixotropic R3 mix for small spalls
The fine-grained version of the non-structural repair mortar with a maximum grain size of 1 mm is designed for small spalls and gouges on walls and on inclined and overhead areas of columns, beams and industrial buildings. The mix is thixotropic, non-shrink, with polymer fibre; mixing water is 0.15…0.17 l per 1 kg. Class R3 and B30: 18.0 MPa after 24 h, 40.0 MPa in compression after 28 days, bond to substrate 2.0 MPa, F1 300.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Dry construction mix with polymer fibre, fine-grained, non-shrink, thixotropic type, on a cement binder, with a maximum grain size of 1 mm |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For non-structural repair of overhead, inclined and vertical surfaces with local damage (spalls, gouges, etc.) up to 20 mm deep |
| Application temperature | optimum +18…+30 °C; permitted from +5 °C |
| Curing | moist curing for 1-2 days (covering with film, spraying with water) |
| Key properties | aggregate size, mm: 1.0; mixing water, l per 1 kg: 0.15…0.17; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170–190 mm; bond strength to substrate, MPa: 2.0; strength after 24 h: flexural 4.0 / compressive 18.0 MPa; strength after 28 days: flexural 7.0 (Btb5.2) / compressive 40.0 (B30) MPa; modulus of elasticity, GPa: 18.0; sulphate resistance group: III; contact zone frost resistance: Fkz 75; frost resistance: F1 300, F2 150; watertightness: W14 |
| Shelf life | 12 months from the date of manufacture; storage at -30…+40 °C, humidity no more than 70 % |
| Standards | Pk2, B30, Btb5.2, W14, F1 300 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R3); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Remontny Zima 400 M — fine-grained antifreeze R3 mix, to −10 °C
Fine-grained R3 mix with an antifreeze admixture for filling small spalls on walls, columns and ceilings down to −10 °C without heating.
Price on request
Pakol
Pakol Remontny Zima 600 M — fine-grained winter R4 mortar for work down to −20 °C
Fine-grained thixotropic mortar for urgent repair of spalls and cavities on walls, columns and ceilings in frost down to −20 °C; 12.0 MPa compressive after 2 h.
Price on request
Pakol
Pakol Remontny 800 K — high-strength thixotropic B60 mortar for strengthening
Thixotropic B60 mix with a modulus of elasticity of 27.0 GPa for strengthening reinforced concrete columns, beams and walls of buildings and bridges; flexural 12.0 MPa.
Price on request
Pakol
Pakol Anker S — B80 grout with steel and polymer fibre in the mix
Flowable cementitious grout for high-precision grouting of equipment, anchor starter bars and joints; fibre already in the mix, 100 MPa compressive after 28 days.
Price on request
Pakol
Pakol Inektsionny B (rapid-hardening microcement) — crack injection down to −15 °C
Rapid-hardening microcement for injecting through and internal cracks, caverns and separations in concrete and masonry; work down to −15 °C without heating.
Price on request