Pakol
Pakol Epoks T — thixotropic epoxy compound for repair and levelling
Thixotropic epoxy mortar for filling spalls and gouges with a chemically resistant coating on concrete, stone and brick; 95.0 MPa compressive at 7 days.
Price on request
Pakol
Pakol Remontny Zima 600 K — coarse-grained winter R4 mortar, 20.0 MPa in 2 h
This coarse-grained mortar with ultra-rapid strength gain is placed in frost down to −20 °C without heating: 20.0 MPa after 2 h, 25.0 MPa in compression after 4 h. Polymer fibre and a thixotropic consistency make it possible to work on walls, inclined areas and ceilings — this is how spalls, gouges and cavities are restored on dams, in tunnels and tanks, on bridges, columns and beams. By 28 days the strength reaches 60.0 MPa (B45); contact zone frost resistance is Fkz 100, that of the base material F1 800, watertightness W20.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, industrial buildings, tanks and treatment plants, columns and beams |
| Base | Dry construction mix, coarse-grained, with polymer fibre, non-shrink, thixotropic type, on a cement binder with ultra-rapid strength gain |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For urgent structural repair of concrete and reinforced concrete structures by eliminating local damage (spalls, gouges, cavities, etc.) up to 60 mm deep on vertical, inclined and overhead surfaces at negative (down to -20 °C) and low positive ambient temperatures |
| Application temperature | down to −20 °C without heating |
| Key properties | aggregate size, mm: 3.0; mixing water, l per 1 kg: 0.14…0.16; workability retention, min: 10; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.5; strength after 2 h: flexural 3.0 / compressive 20.0 MPa; after 4 h: flexural 4.0 / compressive 25.0 MPa; strength after 24 h: flexural 6.0 / compressive 35.0 MPa; strength after 28 days: flexural 8.0 (Btb6.0) / compressive 60.0 (B45) MPa; modulus of elasticity, GPa: 25.0; sulphate resistance group: III; contact zone frost resistance: Fkz 100; frost resistance: F1 800, F2 300; watertightness: W20 |
| Shelf life | 12 months from the date of manufacture; storage at -40…+50 °C, humidity no more than 70 % |
| Standards | Pk2, B45, Btb6.0, W20, F1 800 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R4); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Remontny 600 M — fine-grained thixotropic R4 mix for walls and ceilings
Fine-grained thixotropic R4 mortar for structural repair of shallow spalls on bridges, in tunnels and on columns; watertightness W18.
Price on request
Pakol
Pakol Litevoy 400 K — coarse-grained flowable R3 mortar for deep gouges
Coarse-grained flowable class R3 mix for non-structural repair of deep gouges on floors, roads and bridges; 40.0 MPa compressive after 28 days.
Price on request
Pakol
Pakol Litevoy Zima 600 K — coarse-grained winter flowable mix to −20 °C, no heating
Coarse-grained winter B50 flowable mortar for deep gouges on bridges and equipment foundations, without heating down to −20 °C; 20.0 MPa after 2 h.
Price on request
Pakol
Pakol Anker — B70 non-shrink grout for installing machine tools
High-strength flowable mix for grouting machine tools and equipment, installing anchors and filling joints in reinforced concrete; 80.0 MPa compressive after 28 days.
Price on request
Pakol
Pakol Litevoy BK — rapid-hardening flowable mix for the off-season, −10…+7 °C
Off-season flowable mortar for autumn and spring: placing at −10…+7 °C, 15.0 MPa after 2 h, class B50 — for floors, roads and airfields.
Price on request