INDASTRO
LEVELINE FE851 AS antistatic epoxy primer — conductive layer
Black conductive epoxy primer for antistatic floors in electronics, laboratories, cleanrooms and data centres; class KM2.
Price on request
INDASTRO
Profskrin RC40 FSm — winter finishing mortar for fine finishing of concrete
When fine finishing of concrete has to be done in winter, Profskrin RC40 FSm is used: a finishing mortar designed for temperatures from −10 to +10 °C. It is suitable for load-bearing and bridge structures, treatment and industrial facilities, underground ducts and pipelines. Its strength values are the same as those of Profskrin RC40 Sm: from 20 MPa in compression after 24 hours, 30 MPa after 7 days and 40 MPa after 28 days, and the mix stays workable for 30 minutes.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tanks and treatment plants, industrial buildings, columns and beams |
| Base | Portland cement, graded sand with particle size up to 0.63 mm, fibre, modifying admixtures |
| Packaging | bags 25 kg |
| Application method | Profskrin RC40 FSm finishing repair mortar is used for fine finishing of concrete structures in winter: Load-bearing building structures; Bridge structures; Treatment facilities; Underground engineering structures; Industrial structures |
| Application temperature | −10…+10 °C |
| Key properties | mixing water: 0.16-0.17; compressive strength at 24 h: ≥20 MPa; compressive strength at 7 days: ≥30 MPa; compressive strength at 28 days: ≥40 MPa; flexural strength at 28 days: ≥6 MPa; bond strength to substrate: ≥1.5 MPa; workability retention: 30 min; frost resistance: ≥300 cycles; maximum aggregate size, mm: 0.63 |
| Shelf life | 12 months in the original factory packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Profskrin RC45-1.25 F — winter fine-grained thixotropic R4 mortar
Winter thixotropic R4 mortar with 1.25 mm aggregate for repairing concrete structures at temperatures from −10 to +10 °C.
Price on request
INDASTRO
Innolayn NC40 F — winter grout for work at −10…+10 °C
Cementitious grout for installing equipment, columns, joints and anchors at low temperatures; 10 MPa after 6 hours at −10 °C, 50 MPa at 28 days.
Price on request
INDASTRO
Profskrin RC80 — thixotropic R4 mortar for concrete of class B60 and above
Thixotropic R4 repair mortar for structures made of B60 concrete and above; compressive strength at 28 days at least 80 MPa, flexural strength 10 MPa.
Price on request
INDASTRO
LEVELINE FP840 one-component polyurethane primer — hardening impregnation for concrete
Moisture-curing polyurethane primer for polymer floors and stand-alone impregnation of concrete in workshops and warehouses; fire hazard class KM1.
Price on request
INDASTRO
LEVELINE FC830 finishing self-levelling floor — cement-based self-levelling compound
Cement self-levelling floor for workshops, warehouses and public buildings, and a base for polymer coatings; walkable after 3 hours.
Price on request