INDASTRO
Innolayn NC40 RF3 — R4 grout for work at −25…−10 °C
Cementitious R4 grout for installing equipment, columns, joints and anchors at sub-zero temperatures; 15 MPa after 6 hours at −25 °C.
Price on request
INDASTRO
Innolayn NC60 SFiber — two-component grout with steel reinforcing fibre
Steel reinforcing fibre, supplied as a separate component, distinguishes Innolayn NC60 SFiber from the standard NC60: the flexural strength of this grout is at least 10 MPa after 24 hours and 14 MPa after 28 days, the compressive strength 30 and 60 MPa. Component A consists of cement, graded sand and modifying admixtures. The grout is used for high-precision installation of presses, machine tools, generators, pumps and compressors, under column bases and for repairing heavily reinforced structures, bridges, roads, airfields and car parks by pouring.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams, bridges and overpasses, roads and airfields |
| Base | Component A — cement, graded sand, modifying admixtures; component B — steel reinforcing fibre |
| Packaging | bag 25 kg (component A) + steel fibre (component B) |
| Application method | High-precision installation of industrial equipment (presses, machine tools, generators, pumps, compressors, lifting and handling equipment, diesel engines), grouting under column bases, repair of heavily reinforced structures, bridges, road pavements, airfields and car parks by pouring |
| Application temperature | +5…+35 °C |
| Key properties | maximum aggregate size: 3.0 mm; water: 3–3.25 l per bag (component A); workability (cone spread): 280–350 mm; workability retention: 60 min; flexural strength at 24 h / 28 days: ≥10 / ≥14 MPa; compressive strength at 24 h / 28 days: ≥30 / ≥60 MPa; bond to concrete: ≥2 MPa; linear expansion/shrinkage: ≤0.8 mm/m; service in aggressive environments: 5 < pH < 14; frost resistance: F1 1000, F2 300; water impermeability: W16; service temperature: −60…+80 °C |
| Shelf life | 12 months in the original factory packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FA892 acrylic primer — for cement self-levelling floors and screeds
Acrylic primer with antiseptic for concrete before self-levelling floors, screeds and toppings indoors; tack-free in 60 minutes.
Price on request
INDASTRO
Profskrin RC80 — thixotropic R4 mortar for concrete of class B60 and above
Thixotropic R4 repair mortar for structures made of B60 concrete and above; compressive strength at 28 days at least 80 MPa, flexural strength 10 MPa.
Price on request
INDASTRO
Profskrin IE2 E — elastic epoxy resin for crack injection
Two-component low-viscosity epoxy resin for elastic bonding of structures with crack widths of 0.3–5 mm; elongation at break 30 %.
Price on request
INDASTRO
Profskrin RC45-1.25 — thixotropic R4 mortar with fine 1.25 mm aggregate
Thixotropic R4 mortar with 1.25 mm aggregate for structural repair of concrete; 20 MPa in 24 hours and 45 MPa in 28 days.
Price on request
INDASTRO
Profskrin RC50 RTi — ultra-rapid-hardening thixotropic R4 mortar with fibre
Non-shrink thixotropic R4 mortar to EN 1504 with polymer fibre: 20 MPa in compression after 2 hours, work at temperatures from −10 to +35 °C.
Price on request