Profskrin RC60 — thixotropic R4 mortar for repairing high-strength concrete, 60 MPa
Thixotropic R4 repair mortar for high-strength concrete structures; at least 30 MPa after 24 hours and from 60 MPa after 28 days.

Khimskrin SE 2k, based on an epoxy binder, protects reinforced concrete elements of water treatment plants and sewer networks against sulphuric acid, hydrogen sulphide, oxides of nitrogen, sulphur and carbon and wastewater, and, over a primer, metal surfaces as well. The coating withstands one month of continuous exposure to sulphuric acid at concentrations of 10, 50 and 80 % at 20 and 40 °C, nitric acid 20 %, potassium hydroxide 20 %, ammonia 25 %, petroleum products and oils. The components are mixed in a ratio of 5:2, pot life is 120 minutes; contact with drinking water and application on a damp substrate are permitted.
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | other concrete repair materials |
| Use | tanks and treatment plants |
| Base | Two-component protective compound with an epoxy binder |
| Packaging | 28 kg kit: component A 20 kg (iron pail), component B 8 kg (plastic can) |
| Application method | Protection of reinforced concrete elements of water treatment plants and sewer networks against sulphuric acid, hydrogen sulphide, oxides of nitrogen, sulphur and carbon, and wastewater; protection of metal surfaces (over primer) |
| Application temperature | +5…+30 °C |
| Key properties | base: epoxy binder, 2 components, ratio A:B by weight 5:2; density: 1.55 g/cm³; pot life: 120 min; second coat: after 6–24 h; contact with drinking water and application on a damp substrate are permitted; resistance (1 month of continuous exposure): sulphuric acid 10 / 50 / 80 % at 20 and 40 °C, acetic and formic acid 5 %, nitric acid 20 %, potassium hydroxide 20 %, ammonia 25 %, petroleum products, oils; hydrochloric acid 37 % — up to 7 days |
| Shelf life | 12 months in a dry place in the original packaging at +5…+30 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Thixotropic R4 repair mortar for high-strength concrete structures; at least 30 MPa after 24 hours and from 60 MPa after 28 days.
Epoxy self-levelling floor with 100% solids for workshops, warehouses, car parks, food and pharmaceutical plants; Shore D hardness from 85.
Finishing repair mortar with fibre and sand up to 0.63 mm for load-bearing, bridge and treatment structures; compressive strength from 20 MPa after one day.
Thixotropic R4 repair mortar for structures made of B60 concrete and above; compressive strength at 28 days at least 80 MPa, flexural strength 10 MPa.
Two-component matt polyurethane varnish for protecting epoxy and polyurethane floors and sealing chips; gloss level 7–9%.
Solvent-free epoxy primer for self-levelling and decorative polymer floors, also a stand-alone impregnation; adhesion to concrete from 2.5 MPa.