CarbonWrap
CarbonWrap® Resin 530+ two-component epoxy saturating resin, incl. “winter” version
Epoxy saturating resin for high-density carbon materials, for hand and machine impregnation; the “winter” version works from +10 °C.
Price on request
CarbonWrap
CarbonWrap® Lamel HS-12 CFRP laminate (12/50, 12/100) — external reinforcement
CarbonWrap Lamel HS-12 is a ready-made plate of high-strength carbon fibres in an epoxy matrix with a fibre volume content of more than 65 %; the width is 50 mm (cross-section 60 mm²) or 100 mm (cross-section 120 mm²), in rolls of 100 linear m. In the CarbonWrap system it is bonded to the prepared substrate with CarbonWrap Resin Laminate+ epoxy adhesive and pressed on with a roller. The laminates are used to increase the load-bearing capacity of and repair structures of industrial buildings, bridges and beams, for seismic retrofitting and for limiting crack formation.
Specifications
| Manufacturer | CarbonWrap — OOO “Nanotekhnologicheskiy tsentr kompozitov”, Moscow |
|---|---|
| Type | composite strengthening |
| Use | industrial buildings, bridges and overpasses, columns and beams |
| Base | plate of high-strength carbon fibres in an epoxy matrix |
| Packaging | laminates 1.2 × 50 mm (cross-section 60 mm2) and 1.2 × 100 mm (cross-section 120 mm2), rolls of 100 linear m |
| Application method | substrate sound, prepared by abrasive methods, free of defects, protrusions and voids, dust-free, dry; lay the laminates out on a clean table, clean them with acetone or a suitable solvent, wait at least 30 min for the solvent to evaporate; the laminate is placed within the pot life of the adhesive and pressed on with a rubber roller, excess adhesive is removed |
| Key properties | fibre type — high-strength carbon; epoxy matrix; fibre volume content > 65 %; tensile strength > 3500 MPa; modulus of elasticity > 170 GPa; width 50 or 100 mm; cross-section 60 or 120 mm2 |
| Shelf life | 1 year from the date of manufacture; in closed packaging, in a dry room at +5…+25 °C |
| Standards | TU 22.21.42-044-38276489-2017 (TU 2256-044-38276489-2017) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by CarbonWrap
CarbonWrap
CarbonWrap® Putty S two-component epoxy putty — summer version from +10 °C
Epoxy putty for levelling the substrate and repairing small defects and cracks before installing CarbonWrap at temperatures from +10 °C.
Price on request
CarbonWrap
CarbonWrap® Fabric 240/1200 carbon fabric (bidirectional, 2×2 twill) — 3K yarn
Bidirectional carbon fabric of 3K yarn for strengthening and seismic retrofitting of reinforced concrete, masonry, steel and timber; roll width 1200 mm.
Price on request
CarbonWrap
CarbonWrap® Tape 600 carbon tape (600/150, 600/300, 600/600) — tapes in three widths
Unidirectional carbon tape on 24K yarn for strengthening slabs, bridge span beams, columns and pylons; width 150, 300 or 600 mm.
Price on request
CarbonWrap
CarbonWrap® Lamel T-50 CFRP laminate (T-50/83, T-50/120) — polyurethane matrix
Polyurethane-pultruded CFRP laminate 83 or 120 mm wide for strengthening beams, bridges and industrial structures; rolls of 11 linear m.
Price on request
CarbonWrap
CarbonWrap® Resin WS+ epoxy saturating resin (for damp surfaces) — underwater installation
Epoxy saturating resin for installing the CarbonWrap system on damp concrete, stone and metal, and under water; bond to concrete at least 2.5 MPa.
Price on request