CarbonWrap
CarbonWrap® Lamel HS-12 CFRP laminate (12/50, 12/100) — external reinforcement
CFRP laminate with an epoxy matrix for strengthening beams, bridges and industrial buildings; width 50 or 100 mm, strength above 3500 MPa.
Price on request
CarbonWrap
CarbonWrap is an external reinforcement system made by OOO Nanotekhnologicheskiy Tsentr Kompozitov in Moscow. The catalogue covers all its components: unidirectional carbon Tape in several weights, bidirectional Fabric woven from 3K, 6K and 12K yarn, Lamel HS-12, HS-14 and T-50 carbon fibre laminates, Grid meshes for use in mineral mortar and Anchor ropes.
They are matched by the epoxy resins Resin 300+ and Resin 530+ for saturation, Resin WS+ for damp substrates and underwater installation, Resin HT+ for heated structures, the Resin Laminate+ adhesive for laminates and steel plates, Putty S and Putty W fillers and the Primer. Chipped areas and cavities are restored before strengthening with the Repair ST and Repair FS mortars.
Type
Application
CarbonWrap
CarbonWrap® Lamel HS-14 CFRP laminate (14/50, 14/100, 14/120) — three widths
CFRP laminate 50, 100 or 120 mm wide for strengthening beams, bridges, columns and industrial buildings; modulus of elasticity above 170 GPa.
Price on request
CarbonWrap
CarbonWrap® Lamel T-50 CFRP laminate (T-50/83, T-50/120) — polyurethane matrix
Polyurethane-pultruded CFRP laminate 83 or 120 mm wide for strengthening beams, bridges and industrial structures; rolls of 11 linear m.
Price on request
CarbonWrap
CarbonWrap® Primer two-component epoxy primer — substrate preparation
Epoxy primer for treating concrete, reinforced concrete and masonry before installing the CarbonWrap system; pot life at least 90 min.
Price on request
CarbonWrap
CarbonWrap® Putty S two-component epoxy putty — summer version from +10 °C
Epoxy putty for levelling the substrate and repairing small defects and cracks before installing CarbonWrap at temperatures from +10 °C.
Price on request
CarbonWrap
CarbonWrap® Putty W two-component epoxy putty — for work at +5…+23 °C
Epoxy putty for preparing the substrate for CarbonWrap at low temperatures, from +5 to +23 °C; suitable for overhead surfaces.
Price on request
CarbonWrap
CarbonWrap® Resin 300+ two-component epoxy saturating resin — for tapes and fabrics
Epoxy saturating resin for impregnating and bonding carbon and other reinforcing fabrics and tapes by the “wet” method; bond to concrete above 2.5 MPa.
Price on request
CarbonWrap
CarbonWrap® Resin 530+ two-component epoxy saturating resin, incl. “winter” version
Epoxy saturating resin for high-density carbon materials, for hand and machine impregnation; the “winter” version works from +10 °C.
Price on request
CarbonWrap
CarbonWrap® Resin Laminate+ two-component epoxy adhesive — for laminates and plates
Epoxy adhesive paste for bonding CFRP laminates and steel plates, levelling the substrate and repairing cracks; 30 kg kit.
Price on request
CarbonWrap
CarbonWrap® Anchor carbon anchor rope (D10, D12) — anchoring of tapes and fabrics
Carbon rope 10 or 12 mm in diameter for fixing CarbonWrap tapes, fabrics and grids to concrete, reinforced concrete and masonry.
Price on request
CarbonWrap
CarbonWrap® Fabric 240/1200 carbon fabric (bidirectional, 2×2 twill) — 3K yarn
Bidirectional carbon fabric of 3K yarn for strengthening and seismic retrofitting of reinforced concrete, masonry, steel and timber; roll width 1200 mm.
Price on request
CarbonWrap
CarbonWrap® Fabric 300/1200 carbon fabric (bidirectional, 2×2 twill) — 6K yarn
Bidirectional carbon fabric of 6K yarn for repair and seismic retrofitting of reinforced concrete, masonry and reinforced masonry, and steel structures.
Price on request
CarbonWrap
CarbonWrap® Fabric 450/1200 carbon fabric (bidirectional, 2×2 twill) — 12K yarn
Bidirectional carbon fabric of 12K yarn for strengthening structures of complex shape and in confined conditions; roll width 1200 mm.
Price on request
CarbonWrap
CarbonWrap® Grid 150/1200 carbon grid — reinforcement in repair mortar
Carbon grid with a 10 × 20 mm mesh for strengthening structures in mineral repair mortar: bridges, tunnels, tanks, columns.
Price on request
CarbonWrap
CarbonWrap® Grid 260/1200 carbon grid — grid of 24K yarn
Carbon grid on 24K yarn for external and internal reinforcement of bridges, tunnels, tanks and columns in mineral repair mortar.
Price on request
CarbonWrap
CarbonWrap® Repair FS repair mortar — rapid-hardening non-shrink mix
Non-shrink rapid-hardening mix for fast repair of concrete, masonry and cellular concrete, including under CarbonWrap Grid; 30 MPa after one day.
Price on request
CarbonWrap
CarbonWrap® Repair ST repair mortar — thixotropic mix with fibre
Thixotropic fibre-reinforced cement mix for restoring spalls, potholes and cracks in concrete, including under CarbonWrap Grid.
Price on request
CarbonWrap
CarbonWrap® Resin HT+ epoxy saturating resin (increased heat resistance) — up to 110 °C
Epoxy saturating resin for the CarbonWrap system on structures operating at 60–110 °C, including together with fire protection; adhesion above 2.5 MPa.
Price on request
CarbonWrap
CarbonWrap® Resin WS+ epoxy saturating resin (for damp surfaces) — underwater installation
Epoxy saturating resin for installing the CarbonWrap system on damp concrete, stone and metal, and under water; bond to concrete at least 2.5 MPa.
Price on request
CarbonWrap
CarbonWrap® Tape 230/300 carbon tape — unidirectional reinforcing material
Unidirectional carbon tape 300 mm wide for external reinforcement of columns, beams and other structures with CarbonWrap Resin saturating resin.
Price on request
CarbonWrap
CarbonWrap® Tape 300 carbon tape (300/150, 300/300, 300/600) — external reinforcement
Unidirectional carbon tape for the CarbonWrap external reinforcement system, in rolls 150, 300 and 600 mm wide; fibre strength over 4.9 GPa.
Price on request
CarbonWrap
CarbonWrap® Tape 530/300 carbon tape — high-density tape
High-density unidirectional carbon tape on 24K yarn for strengthening columns and beams; impregnated with CarbonWrap Resin 530+ saturating resin.
Price on request
CarbonWrap
CarbonWrap® Tape 600 carbon tape (600/150, 600/300, 600/600) — tapes in three widths
Unidirectional carbon tape on 24K yarn for strengthening slabs, bridge span beams, columns and pylons; width 150, 300 or 600 mm.
Price on request
CarbonWrap
CarbonWrap® Tape 900/300 carbon tape — tape for external reinforcement
Unidirectional 900/300 carbon tape on 24K yarn for the CarbonWrap strengthening system; 50 m roll 300 mm wide, fibre stronger than 4.9 GPa.
Price on request
No materials match these filters.