CarbonWrap
CarbonWrap® Resin 530+ two-component epoxy saturating resin, incl. “winter” version
Epoxy saturating resin for high-density carbon materials, for hand and machine impregnation; the “winter” version works from +10 °C.
Price on request
CarbonWrap
CarbonWrap® Fabric 300/1200 carbon fabric (bidirectional, 2×2 twill) — 6K yarn
CarbonWrap Fabric 300/1200 is woven in 2×2 twill from 6K carbon yarn, with 38 ± 1 yarns per 10 cm in the warp and weft, and reinforces the structure in two directions — 0° and 90°. It is used in the CarbonWrap external reinforcement system for strengthening, restoration, repair and seismic retrofitting of reinforced concrete, concrete, masonry, reinforced masonry and steel structures, impregnated with CarbonWrap Resin epoxy saturating resin. The fibre has a tensile strength of at least 4.9 GPa and a modulus of elasticity of at least 245 GPa; the rolls are 1200 mm wide.
Specifications
| Manufacturer | CarbonWrap — OOO “Nanotekhnologicheskiy tsentr kompozitov”, Moscow |
|---|---|
| Type | composite strengthening |
| Use | columns and beams |
| Base | bidirectional carbon fabric of high-strength carbon fibres, fibre direction 0°/90°, 2×2 twill weave; warp and weft — 6K carbon yarn |
| Packaging | rolls of 50 and 100 linear m, width 1200 ± 10 mm, 1 roll per cardboard box; sold by the roll |
| Application method | cutting to the design bonding layout on a clean, flat surface covered with protective film; cut with scissors or a sharp knife, wearing protective gloves; keep free of sand, dust, water, oils and solvents; do not fold the fabric (the fibres break at the fold), it may be rolled up for transport; prevent splitting into strands and damage to the fibre; impregnation and bonding with CarbonWrap Resin epoxy saturating resin |
| Key properties | fibre direction 0°/90°; warp and weft yarn count 38 ± 1 yarns per 10 cm (6K); fibre tensile strength at least 4.9 GPa; fibre tensile modulus at least 245 GPa; fibre elongation at break 1.8 % |
| Shelf life | unlimited |
| Standards | TU 23.99.14-042-38276489-2017 (TU 1916-042-38276489-2017) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by CarbonWrap
CarbonWrap
CarbonWrap® Tape 600 carbon tape (600/150, 600/300, 600/600) — tapes in three widths
Unidirectional carbon tape on 24K yarn for strengthening slabs, bridge span beams, columns and pylons; width 150, 300 or 600 mm.
Price on request
CarbonWrap
CarbonWrap® Repair ST repair mortar — thixotropic mix with fibre
Thixotropic fibre-reinforced cement mix for restoring spalls, potholes and cracks in concrete, including under CarbonWrap Grid.
Price on request
CarbonWrap
CarbonWrap® Primer two-component epoxy primer — substrate preparation
Epoxy primer for treating concrete, reinforced concrete and masonry before installing the CarbonWrap system; pot life at least 90 min.
Price on request
CarbonWrap
CarbonWrap® Repair FS repair mortar — rapid-hardening non-shrink mix
Non-shrink rapid-hardening mix for fast repair of concrete, masonry and cellular concrete, including under CarbonWrap Grid; 30 MPa after one day.
Price on request
CarbonWrap
CarbonWrap® Fabric 240/1200 carbon fabric (bidirectional, 2×2 twill) — 3K yarn
Bidirectional carbon fabric of 3K yarn for strengthening and seismic retrofitting of reinforced concrete, masonry, steel and timber; roll width 1200 mm.
Price on request