CarbonWrap
CarbonWrap® Lamel HS-12 CFRP laminate (12/50, 12/100) — external reinforcement
CFRP laminate with an epoxy matrix for strengthening beams, bridges and industrial buildings; width 50 or 100 mm, strength above 3500 MPa.
Price on request
CarbonWrap
CarbonWrap® Fabric 240/1200 carbon fabric (bidirectional, 2×2 twill) — 3K yarn
CarbonWrap Fabric 240/1200 is a bidirectional 2×2 twill-weave material with fibres in the 0° and 90° directions, woven from 3K carbon yarn. In the CarbonWrap system it is impregnated and bonded with CarbonWrap Resin epoxy saturating resin for strengthening, repair and seismic retrofitting of reinforced concrete, concrete, masonry and steel structures, and for increasing the load-bearing capacity of brick and timber elements. The fibre strength is at least 4.9 GPa, the modulus of elasticity at least 245 GPa, and the shelf life of the fabric is unlimited.
Specifications
| Manufacturer | CarbonWrap — OOO “Nanotekhnologicheskiy tsentr kompozitov”, Moscow |
|---|---|
| Type | composite strengthening |
| Use | columns and beams |
| Base | bidirectional carbon fabric of high-strength carbon fibres, fibre direction 0°/90°, 2×2 twill weave; warp and weft — 3K carbon yarn |
| Packaging | rolls of 50 and 100 linear m, width 1200 ± 10 mm, 1 roll per cardboard box; sold by the roll |
| Application method | cutting to the design bonding layout on a clean, flat surface covered with protective film; cut with scissors or a sharp knife, wearing protective gloves; keep free of sand, dust, water, oils and solvents; do not fold the fabric (the fibres break at the fold), it may be rolled up for transport; prevent splitting into strands and damage to the fibre; impregnation and bonding with CarbonWrap Resin epoxy saturating resin |
| Key properties | fibre direction 0°/90°; warp and weft yarn count 60 ± 1 yarns per 10 cm (3K); fibre tensile strength at least 4.9 GPa; fibre tensile modulus at least 245 GPa; fibre elongation at break 1.8 % |
| Shelf life | unlimited |
| Standards | TU 23.99.14-042-38276489-2017 (TU 1916-042-38276489-2017) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by CarbonWrap
CarbonWrap
CarbonWrap® Resin 300+ two-component epoxy saturating resin — for tapes and fabrics
Epoxy saturating resin for impregnating and bonding carbon and other reinforcing fabrics and tapes by the “wet” method; bond to concrete above 2.5 MPa.
Price on request
CarbonWrap
CarbonWrap® Anchor carbon anchor rope (D10, D12) — anchoring of tapes and fabrics
Carbon rope 10 or 12 mm in diameter for fixing CarbonWrap tapes, fabrics and grids to concrete, reinforced concrete and masonry.
Price on request
CarbonWrap
CarbonWrap® Fabric 450/1200 carbon fabric (bidirectional, 2×2 twill) — 12K yarn
Bidirectional carbon fabric of 12K yarn for strengthening structures of complex shape and in confined conditions; roll width 1200 mm.
Price on request
CarbonWrap
CarbonWrap® Grid 260/1200 carbon grid — grid of 24K yarn
Carbon grid on 24K yarn for external and internal reinforcement of bridges, tunnels, tanks and columns in mineral repair mortar.
Price on request
CarbonWrap
CarbonWrap® Tape 900/300 carbon tape — tape for external reinforcement
Unidirectional 900/300 carbon tape on 24K yarn for the CarbonWrap strengthening system; 50 m roll 300 mm wide, fibre stronger than 4.9 GPa.
Price on request