VM-6233R — epoxy powder for factory pipe coating
A factory material: epoxy powder that pipe plants spray onto a heated pipe as a single coat or as the first coat of a system.

The main distinction of PLAMCOR-303 is that it is designed not only for metal but also for reinforced concrete, and it combines protection against fire and corrosion. The base is epoxy and the hardener is an aliphatic polyamine; the coating is intumescent and suits all atmosphere types, including the open industrial atmosphere. Service life in the open atmosphere is at least 30 years. EAEU certificates (including EAEU KZ), NSOPB certificates and a seismic resistance certificate are available.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Application | steel structures, concrete and reinforced concrete |
| Service conditions | macroclimatic regions U, UKhL, KhL, all atmosphere types and placement categories per GOST 15150, incl. open industrial atmosphere |
| Base | epoxy base + aliphatic polyamine hardener; intumescent, two-pack |
| Colour | grey (shade not standardised) |
| Packaging | base — 20 l metal bucket, hardener — 3 l |
| Application method | airless spray (nozzle 0.031–0.047″, ≥ 25 MPa), brush/roller |
| Application temperature | from −5 to +40 °C, relative humidity ≤ 80 %; the material itself — not below +15 °C |
| Drying | to degree 3 — no more than 6 h (20 °C); before enamel — no more than 1 month |
| Compatible primers and topcoats | enamels POLITON-UR (UV), VINIKOR-62, ALISTERUS 3105, polyurethane, vinyl-epoxy |
| Shelf life | 24 months |
| Standards | TU 20.30.22-145-12288779-2023; GOST 15150; GOST 9980.5; GOST 19007; EAEU certificates (incl. EAEU KZ), NSOPB; seismic resistance certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
A factory material: epoxy powder that pipe plants spray onto a heated pipe as a single coat or as the first coat of a system.
Antifouling enamel without organotin compounds for low- and medium-speed ships and fixed structures; applied from −5 °C.
Acrylic primer-enamel for steel structures, bridges and power facilities; UV-resistant, applied down to −5 °C.
Moisture-curing enamel with micaceous iron oxide — an intermediate coat over zinc primers for bridges, oil and gas, chemical plants and hydraulic structures.
Vinyl-epoxy primer for bridges, oil and gas, power and port facilities; oil- and petrol-resistant, applied down to −10 °C.
Cold galvanising compound for welded rolling-stock structures: allows resistance welding through a single coat without impairing the weld.