Monolit OM fire-protective plaster for steel structures (KrilaK)
Dry mix of hydraulic binder for fire protection of steel structures indoors and outdoors, performance up to 240 min.
Fayreks-700 serves as the adhesive base in structural fire protection: Termal coating, as well as boards and mats, are mounted on this mastic. It is used on air ducts and steel structures, including at NPPs and special facilities, and for thermal insulation of trunk pipelines. It is applied with an AK-500-type unit, brush, roller or spatula; the service temperature range is from −50 to +100 °C. Seismic resistance is 9 points per MRZ, and the service life as part of the coating is at least 15 years.
| Manufacturer | KrilaK — NPO “Association KrilaK” |
|---|---|
| Application | air ducts, steel structures |
| Service conditions | adhesive base for Termal coating and structural fire protection with boards and mats; NPPs and special facilities; from −50 to +100 °C |
| Base | fire-resistant mastic |
| Colour | light beige |
| Application method | AK-500-type unit, brush, roller, spatula |
| Shelf life | storage from +5 to +40 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Dry mix of hydraulic binder for fire protection of steel structures indoors and outdoors, performance up to 240 min.
Dry mix for preparing Joker 522 water-based fire-retardant paint on site for concrete and reinforced concrete structures.
Fire-protective cable coating for 100 % humidity and precipitation at NPPs, chemical plants and in the fuel and energy sector; RP1, D1, V1, T1.
Thick-film sprayable two-component polymer-based material for steel fire protection, group 1 per GOST R 53295-2009.
Dry mix on a mineral binder for fire protection of load-bearing RC structures and tunnels, REI up to 240 including hydrocarbon fire.
Dry mix from which Joker M water-based fire-retardant paint for steel structures with a fire resistance rating of R up to 90 is prepared on site.