TRIOTERM 3000 — water-based acrylic thermal insulation material
Single-component water-based acrylic thermal insulation material for facades, concrete and steel; weather-resistant, from −40 to +70 °C.

A partner for the solvent-based paint TRIOFLAME AK 7700: TRIOTERM 3800 is used in combined structural fire protection systems for steel structures. It is a single-component acrylic material, white or light grey; it is applied by airless spray or by hand at −10…+35 °C and left for more than 24 h before overcoating. The service range is from −40 to +80 °C; it is supplied in euro pails of 13.7 kg net, and the shelf life is 12 months. No fire resistance rating of its own is declared for the material.
| Manufacturer | TRIOFLAME (O3) — OOO O3-Coatings, Rostov Region |
|---|---|
| Application | steel structures |
| Service conditions | service from −40 to +80 °C |
| Base | single-component acrylic thermal insulation material; non-volatile content 70±5% by volume |
| Colour | white, light grey |
| Packaging | euro pails, 13.7 kg net |
| Application method | airless spray, manual application |
| Application temperature | −10…+35 °C; humidity not above 85% |
| Drying | to overcoating more than 24 h at +20 °C |
| Compatible primers and topcoats | primer TRIOCOR PRIMER 1100 / MASTIC 4500; fire protection TRIOFLAME AK 7700; finish TRIOCOR FINISH 5500 |
| Shelf life | 12 months; storage at −5…+40 °C |
| Standards | TU 20.30.12-274-40141638-2022 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Single-component water-based acrylic thermal insulation material for facades, concrete and steel; weather-resistant, from −40 to +70 °C.
Two-component weather-resistant fire protection compound for steel structures: up to R150, service from −60 to +70 °C.
Two-component epoxy thermal insulation for steel structures: protection against cryogenic spills, a layer in combined fire protection systems.
Solvent-based intumescent coating for steel structures: up to R150 in a cellulosic fire, application from −10 °C.
Vermiculite-based fire protection plaster mix for steel: from R15 to R240 under standard and hydrocarbon fire regimes.
Two-component intumescent epoxy coating for steel: up to R120 in standard and hydrocarbon fires, service from −60 °C.