NEOFLAME 518 SP fast-curing fire protection compound
Two-component thick-film silane-based fire protection compound for steel and concrete in open industrial atmosphere up to C5-I/C5M.
The open industrial atmosphere of a temperate climate (U1–U3, type II atmosphere) and premises with high humidity are the main field of application for NEOFLAME 517 RA. This one-component ready-to-use compound on modified hybrid resins needs no protective coating: its service life without one is 10 years. Fire protection performance is up to R120 under a cellulosic fire curve, and seismic resistance is 9 points on the MSK-64 scale, including nuclear power plants of categories I and II. It is applied with hydraulic piston high-pressure units at temperatures from −10 to +35 °C.
| Manufacturer | NEOFLAME (Teplokhim) — OOO NPP TEPLOKHIM, Dmitrov |
|---|---|
| Fire protection performance | up to R120 (cellulosic fire) |
| Application | steel structures |
| Service conditions | open industrial atmosphere of a temperate climate (U1, U2, U3, atm. II) and premises with high humidity, without a protective coating; from −60 °C to +60 °C |
| Base | modified hybrid weather-resistant resins in an organic solvent (thinner: xylene, white spirit, solvent naphtha) |
| Colour | white, pastel shades possible |
| Packaging | euro pail 20 l (25 kg) |
| Application method | hydraulic piston high-pressure units (Wagner, at least 8 l/min, up to 25 MPa) |
| Application temperature | from −10 °C to +35 °C; humidity not above 80 % |
| Drying | to degree 3: no more than 3 h at +20 °C; intercoat at least 6 h at 20 °C |
| Compatible primers and topcoats | no finish required; primers: alkyd, epoxy, alkyd-acrylic, phenolic, polyurethane, vinyl chloride (e.g. GF-021) |
| Shelf life | 12 months; storage and transport from −25 °C to +35 °C |
| Standards | TU 20.30.12-055-66828143-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Two-component thick-film silane-based fire protection compound for steel and concrete in open industrial atmosphere up to C5-I/C5M.
Water-based fire protection paint for cables and cable structures, complies with GOST R 53311 (flame damage length under 1.5 m).
Sprayable kaolin compound for structural fire protection of reinforced concrete, up to REI150; white or light grey water-based paste.
EI30 fire protection system for air ducts: NATRSIL-S 541 adhesive compound and Folma-Kholst KhF foil-faced thermal insulation fabric.
Water-emulsion intumescent paste for fire protection of steel structures inside buildings, up to R45; kit of paste and ammophos.
Solvent-borne fire protection paint for steel structures up to R120, applied at temperatures down to −15 °C.