Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Sazilast 24 Snezhinka — winter polyurethane sealant for facade joints
Sazilast (SAZI)

Sazilast 24 Snezhinka — winter polyurethane sealant for facade joints

Joint sealants

The winter formulation of Sazilast 24 Snezhinka makes it possible to seal panel joints and facade cracks at air temperatures from −20 to +25 °C. It is a two-component non-shrinking polyurethane sealant for above-ground parts of buildings; besides a spatula, it can be applied by brush. The joint withstands movement of ±25% and service from −60 to +70 °C, and the predicted service life is 10 conventional years. Kit — 16.5 kg.

Specifications

ManufacturerSazilast (SAZI) — OOO PK “SAZI”, Ramenskoye
Typejoint sealants
Usejoints and junctions
Basetwo-component non-shrinking polyurethane sealant (A — polyol, V — polyurethane prepolymer)
Colourwhite, grey
Packaging16.5 kg kit
Application methodmix components A and V with a low-speed drill at 300–350 rpm for at least 10 min; in cold weather condition to +15…+25 °C before mixing; do not add solvents or water; substrate damp but not wet, cleaned; a compressed polyethylene foam backer rod is placed in the joint (no three-sided adhesion); apply by spatula; working layer from 3 mm to 1/2 of the joint width
Application temperaturefrom −20 to +25 °C
Curingpot life at least 5 h at 23 °C; full cure 7 days at 23 °C
Key propertiespermissible movement amplitude ±25%; nominal tensile strength at break at least 0.2 MPa; elongation at break at least 300% (on joint specimens); cohesive failure; Shore A hardness after 24 h 20–30; flow not more than 3 mm; density 1.6 g/cm³; dynamic viscosity (0.3 / 13.5 s⁻¹, 25 °C) at least 850 / not more than 65 Pa·s; service from −60 to +70 °C; predicted service life 10 conventional years (3 mm layer, ±25%)
Layer thicknessworking layer at least 3 mm, not more than 1/2 of the joint width
Consumption96 g/linear m (20 mm joint, 3 mm layer)
Shelf life6 months at −20…+30 °C in undamaged packaging, protected from moisture, dust and direct sunlight
StandardsSTO 032-37547621-2016; GOST R 59522-2021, classes 1 and 3P; certificate of conformity for “Sazilast 24” (manufacturer OOO PK “SAZI”, production — Ramenskoye)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Sazilast (SAZI)