LEVL (INGRI)
LEVL Coat 307 — low-density epoxy self-levelling floor
Lightweight epoxy compound with high quartz sand loading for warehouses, workshops, car parks and wet rooms; compressive strength 60 MPa.
Price on request
LEVL (INGRI)
LEVL Cure 100 — curing compound for fresh concrete and toppings
Immediately after the concrete or topping is laid, the surface is treated with LEVL Cure 100, a solution of acrylic resins in an organic solvent that forms a film for moisture-retaining curing. It is applied with a velour roller or sprayer; the film dries to degree 3 in no more than 2 hours. The coating is not decorative and gradually wears away: its purpose is to cure the hardening concrete, not to harden it. Packaging: 8 and 18 kg pails, 190 and 200 kg drums; shelf life 24 months.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | production workshops, warehouses and logistics, outdoor areas |
| Base | solution of acrylic resins in an organic solvent |
| Colour | clear liquid, colourless to yellowish; the coating is not decorative |
| Packaging | pails of 8 and 18 kg, drums of 190 and 200 kg |
| Application method | film-forming curing of freshly placed concrete and toppings; velour roller or sprayer |
| Application temperature | air and substrate +5…+30 °C; material +5…+25 °C; humidity up to 80 %; substrate 3 °C above the dew point |
| Curing | drying time to degree 3 no more than 2 h |
| Key properties | Density 0.90 ± 0.01 g/cm³; non-volatile content 16 ± 1 %; drying to degree 3 no more than 2 h |
| Consumption | 100–150 g/m² |
| Shelf life | 24 months; storage at −10…+25 °C |
| Standards | TU 2313-009-94613022-2006; GOST 28513, GOST 52487, GOST 19007 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 308 — economical filled epoxy self-levelling floor
Epoxy compound used only with quartz sand, for warehouses, workshops, car parks and wet rooms; compressive strength 55 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 071 Tixo — thixotropic additive for MMA and polymer compounds
Polyethylene fibres that make carboacrylates, adhesives, sealants and coatings thixotropic; chemically resistant, asbestos-free additive.
Price on request
LEVL (INGRI)
LEVL Self 12 — self-levelling underlayment for industrial coatings
Cementitious levelling compound for levelling concrete before laying polymer and cementitious floors; subsequent layers after 2–3 days.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 017 — thin-layer polyurethane-cement coating
PU-cement floor for food workshops and laboratories with moderate abrasive and chemical loads; service up to +90 °C.
Price on request
LEVL (INGRI)
LEVL RemTop — compound for local repair of topping floors
Polymer-cement primer and gauging agent for repairing hardened floors with LEVL Top mixes; bond to substrate at least 1.5 MPa.
Price on request