LEVL (INGRI)
LEVL Top WL — mortar topping for restoring old concrete floors
High-strength cement mix laid over old concrete indoors and outdoors; compressive strength at least 70 MPa, flexural strength 8 MPa.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 05 — polyurethane-cement primer for PoliCem systems
Laying of PoliCem polyurethane-cement floors starts with priming with LEVL PoliCem PU 05. The three-component material based on modified polyurethane, cement and aggregate seals concrete pores; it is applied with a flat trowel in two coats, filled with quartz sand. Substrate moisture must be no more than 6 % by weight, and the working temperature from +10 to +30 °C. Systems on this primer are used at food and pharmaceutical plants, in livestock farming, the chemical industry, workshops and warehouses.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | floor primers |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | semi-matt grey primer |
| Packaging | 10 kg kit: A — metal pail 3.92 kg; B — plastic jerrycan 3.98 kg; C — paper bag 2.1 kg; A : B : C = 1.00 : 1.02 : 0.54 |
| Application method | priming and sealing of concrete pores under PoliCem coatings: 2 coats with a flat trowel, filled with 10–30 % quartz sand 0.1–0.3 mm |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % by weight |
| Curing | pot life +10 °C 20 min, +20 °C 15 min, +30 °C 10 min; recoat interval +10 °C ~24 h, +20 °C ~16 h, +30 °C ~12 h |
| Key properties | Density 1.20 ± 0.05 g/cm³; adhesion (cross-cut test) no more than grade 1; service temperature from −40 °C to +90 °C |
| Layer thickness | from 0.3 to 0.8 mm |
| Consumption | 0.4 kg/m² (+ quartz sand 0.1–0.3 mm 0.12 kg/m²) |
| Shelf life | 6 months; storage at +5…+25 °C, protect component C from moisture |
| Standards | TU 2257-021-94613022-2010; GOST 31992.1, GOST 15140 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Base 200 — acrylic primer under levelling compounds and cementitious floors
Aqueous acrylic dispersion for priming concrete before LEVL Self and CemPol: reduces substrate water absorption and improves adhesion.
Price on request
LEVL (INGRI)
ZIVKON CR 7101 — chemical-resistant epoxy coating for floors and structures
Two-component epoxy paint for floors, walls and steel structures at plants with chemical exposure; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL Coat 211 AS — antistatic epoxy floor paint
Grey antistatic paint coating for warehouses, production facilities and laboratories, and for repairing antistatic floors; 10⁶–10⁹ ohm.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 015 — polyurethane-cement paint coating
Thin-layer PU-cement coating and sand seal coat in PoliCem systems for food and chemical workshops; Taber abrasion up to 60 mg.
Price on request
LEVL (INGRI)
LEVL RemTixo — universal concrete repair compound
Cement mix with polymer fibre for repairing horizontal and vertical concrete surfaces; compressive strength 50 MPa at 28 days.
Price on request