LEVL Coat 551 — polyurethane binder for rubber crumb coatings
One-component solvent-free binder for water-permeable rubber crumb and EPDM coatings on sports grounds and playgrounds.

Work with LEVL Self 6 levelling compound can be carried out at air and substrate temperatures from +5 to +25 °C. The mix on special cements is poured over LEVL Base 200 primer, spread with a squeegee and rolled with a spiked roller; at +20 °C it can be walked on after 4–6 hours. Compressive strength after 28 days is at least 30 MPa, flexural 7 MPa, bond to substrate 2 MPa. Polymer and cementitious coatings are applied over the compound after 2–7 days.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics |
| Base | special cements, modifying additives (self-levelling mix) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 4.25 kg of water per bag |
| Application method | base levelling of concrete under polymer and cementitious coatings; over LEVL Base 200 primer; squeegee + spiked roller; manual and machine application; subsequent coatings after 2–7 days |
| Application temperature | air and substrate +5…+25 °C; humidity at least 50% |
| Curing | pot life at +20 °C 15 minutes; at +20 °C: foot traffic ~4–6 hours, light loads ~1–2 days, full strength gain ~14–28 days |
| Key properties | Compressive strength after 28 days at least 30 MPa; flexural at least 7 MPa; bond at least 2 MPa; mechanical loads: moderate; liquids: high; service temperature from −40 °C to +60 °C |
| Layer thickness | 5–30 mm (thinner layers are possible) |
| Consumption | 9.25–55.5 kg/m² for 5–30 mm |
| Shelf life | 6 months |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST R 58277-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
One-component solvent-free binder for water-permeable rubber crumb and EPDM coatings on sports grounds and playgrounds.
Antistatic and non-sparking PU-cement coating for the aviation, electronics, oil refining and chemical industries; 10⁴–10⁶ ohm.
Cementitious levelling compound for levelling concrete before laying polymer and cementitious floors; subsequent layers after 2–3 days.
High-strength cement mix laid over old concrete indoors and outdoors; compressive strength at least 70 MPa, flexural strength 8 MPa.
Thixotropic epoxy paste with quartz filler for levelling and sealing substrate pores before polymer coatings; adhesion 2.5 MPa.
Lightweight epoxy compound with high quartz sand loading for warehouses, workshops, car parks and wet rooms; compressive strength 60 MPa.