LEVL Coat 306 DA — decontaminable epoxy self-levelling floor
Smooth seamless epoxy coating for nuclear industry rooms subject to decontamination; Shore D hardness at least 70.

LEVL Concrete Strong 7, a lithium silicate impregnation with 6.5 % non-volatile content, helps dustproof and harden a concrete floor without organic solvents. It is sprayed and spread with a microfibre mop after grinding; the product is used on ordinary concrete, for restoring topping floors and in “Mosaic” and “Terrazzo” polished concrete. The impregnation reduces abrasion and water permeability and increases resistance to aggressive media. Concrete must be at least class B20, with hardening completed.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete impregnations and hardeners |
| Use | production workshops, warehouses and logistics, decorative |
| Base | lithium silicate, no organic solvents |
| Colour | clear colourless liquid |
| Packaging | jerrycan 10 kg, 20 kg |
| Application method | spraying and spreading with a microfibre mop after grinding: dustproofing and hardening of concrete, restoration of topping floors, “Mosaic”/“Terrazzo” polished concrete |
| Application temperature | ambient and substrate +5…+30 °C; concrete from B20, hardening completed |
| Key properties | Non-volatile content 6.5 ± 2 %; density 1.04 ± 0.05 g/cm³; increases resistance to aggressive media, reduces abrasion and water permeability |
| Consumption | standard concrete 0.1–0.6 kg/m²; topping restoration 0.1–0.2 kg/m²; polished concrete 0.1–0.4 kg/m² |
| Standards | TU 20.13.62-058-94613022-2017; GOST R 31939, GOST 31992.1; not subject to fire certification (Decision No. 217-R№/17 of 06.07.2017) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Smooth seamless epoxy coating for nuclear industry rooms subject to decontamination; Shore D hardness at least 70.
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.
Fast-curing carboacrylate resin primer under LEVL Coat 573 and 271 systems; work is possible down to −10 °C with an accelerator.
Highly elastic thermoplastic polyolefin tape on epoxy adhesive for expansion joints, cold joints and moving cracks; elongation 600%.
The range's main epoxy self-levelling floor for warehouses, workshops, car parks, healthcare and food production; compressive strength 63 MPa.
Self-levelling mix for preparing concrete for polymer and cementitious coatings in workshops and warehouses; flexural strength 8 MPa.