Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 101 — universal epoxy primer for polymer floors
LEVL (INGRI)

LEVL Coat 101 — universal epoxy primer for polymer floors

Floor primers

The basic primer of the LEVL Coat system, epoxy LEVL Coat 101, consolidates the mineral substrate before epoxy and polyurethane floors are laid. With quartz sand it is used to make a filler for repairing defects and a highly filled compound for coved skirtings and coves, and neat it is used to inject voids in concrete and reinforced concrete. Adhesion to concrete is at least 2.5 MPa, non-volatile content at least 95 %, substrate moisture up to 5 % by weight. Packaging: kits of 0.4; 1.0; 10 and 20 kg.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typefloor primers
Baseepoxy resin; contains a small amount of organic solvent
Colourclear yellowish coating, “wet” concrete look
Packagingkits of 0.4; 1.0; 10; 20 kg; A : B = 1.92 : 1.00 (by weight)
Application methodpriming of mineral substrates under LEVL epoxy and polyurethane floors (with a flat trowel, crosswise, in 2 coats; filled 1:1 with quartz sand and broadcast); filler compound with quartz sand for repairing defects; highly filled compound for coved skirtings and coves; injection of voids in concrete and reinforced concrete
Application temperatureair and substrate +10…+30 °C (recommended +17…+23 °C); material +15…+30 °C; air humidity no more than 80 %; substrate moisture no more than 5 % by weight; substrate 3 °C above the dew point
Curingrecoat interval: +10 °C ~24 h, +23 °C ~12 h, +30 °C ~6 h (at +23 °C no more than 36 h); foot traffic: +10 °C ~5 days, +23 °C ~3 days, +30 °C ~2 days; full strength gain: ~10 / ~7 / ~4 days
Key propertiesDensity 1.06 ± 0.05 g/cm³; non-volatile content by weight at least 95 %; adhesion to concrete at least 2.5 MPa; pot life +10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min; coating service temperature from −10 to +60 °C
Consumptionfiller: LEVL Coat 101 0.5 kg/m² + quartz sand 0.1–0.3 mm 0.5–2.0 kg/m²; priming with filling and broadcast: LEVL Coat 101 0.3 kg/m² + sand 0.3 kg/m² + broadcast 0.7 kg/m²; skirting 50×50 mm: primer 0.03 kg/lin. m (+ sand 0.3–0.9 mm 0.1 kg/lin. m), skirting 0.33 kg/lin. m (+ sand 0.1–0.3 mm 2.4 kg/lin. m and 0.3–0.9 mm 1 kg/lin. m)
Shelf life18 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 2312-001-94613022-2006; works per SP 29.13330.2011 and SP 71.13330.2017; test methods GOST 31992.1, GOST 31939, GOST 28574

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)