LEVL (INGRI)
LEVL PoliCem PU 013 — smooth polyurethane-cement floor coating
Matt polyurethane-cement floor for dairy, brewing and meat production, pharmaceuticals and chemicals; compressive strength 55 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 351 — elastic polyurethane self-levelling floor
LEVL Coat 351 highly elastic polyurethane self-levelling floor bridges cracks in the substrate: relative elongation at break is at least 40 %. It is laid over LEVL Coat 151, 102 W, 104 Rapid, 108 or 118 primers by pouring and rolling with a spiked roller. Taber abrasion is up to 50 mg, Shore D hardness from 55, service from −25 to +60 °C. The coating is used in offices, retail, healthcare, educational institutions, museums and sports complexes, workshops and warehouses, including cold ones and those with temperature changes.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane floors |
| Use | retail and public buildings, production workshops, warehouses and logistics, chemically resistant |
| Base | polyesters, fillers, pigments, special additives + aromatic polyisocyanate (two-component) |
| Colour | RAL colours; uniform gloss finish |
| Packaging | kit of 2.4 and 30 kg; A : B = 5.9 : 1.0 (by weight) |
| Application method | self-levelling, highly elastic protective floor coating over LEVL Coat 151 / 102 W / 104 Rapid / 108 / 118 primer: pouring, squeegee or notched trowel, rolling with a spiked roller |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); material +15…+25 °C; air humidity no more than 80 %; substrate moisture: according to the primer type; 3 °C above the dew point |
| Curing | light loads / recoat interval: +10 °C ~32 h, +23 °C ~16 h, +30 °C ~12 h; foot traffic: ~6 / ~3 / ~2 days; full strength gain: ~10 / ~7 / ~5 days; next coat after 16–48 h at 23 °C |
| Key properties | Taber abrasion (7 days, CS10 / 1000 g / 1000 rev.) no more than 50 mg; Shore D hardness (7 days) at least 55; tensile strength at break at least 7 MPa; relative elongation at break at least 40 %; adhesion to concrete at least 2.5 MPa; density 1.68 ± 0.05 g/cm³; non-volatile content at least 99 %; crack bridging; pot life +10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min; service temperature from −25 to +60 °C; chemical resistance: on request |
| Layer thickness | self-levelling unfilled coating 1.5–3.0 mm |
| Consumption | main layer 1.5–3.0 mm: 2.52–5.04 kg/m²; theoretical consumption 1.68 kg/m² per 1 mm of thickness |
| Shelf life | 6 months from the date of manufacture; storage at +5…+25 °C in covered heated premises |
| Standards | TU 20.30.22-007-94613022-2026; works per SP 29.13330.2011 and SP 71.13330.2017; test methods GOST 31992.1, GOST R 31939, GOST 24621, GOST 11262, GOST 28574 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 573 — main layer of a methyl methacrylate floor with coloured sand
Highly filled carboacrylate coating for workshops, car parks, food and wet rooms; full strength gain in about one day at +20 °C.
Price on request
LEVL (INGRI)
LEVL CemPol 10 — cementitious floor for heavy vehicle traffic
Stiff mortar mix for new and repaired floors of ports, container yards and car parks; strength 60 MPa, frost resistance F1 200.
Price on request
LEVL (INGRI)
LEVL Top WL — mortar topping for restoring old concrete floors
High-strength cement mix laid over old concrete indoors and outdoors; compressive strength at least 70 MPa, flexural strength 8 MPa.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 7 — lithium impregnation for hardening concrete
Lithium silicate impregnation for dustproofing and hardening concrete floors and polished concrete; no organic solvents.
Price on request
LEVL (INGRI)
LEVL CemPol 20 — rapid-hardening self-levelling cementitious floor
Self-levelling finishing floor on special cements for workshops, warehouses and car parks; foot traffic after 2–4 hours, strength 50 MPa at 28 days.
Price on request