LEVL (INGRI)
LEVL RemTixo Grout AF — pourable repair compound for work down to −10 °C
Non-shrink pourable mix for concrete repair in operating cold stores, on roads and airfields; 25 MPa compressive strength after 2 hours.
Price on request
LEVL (INGRI)
LEVL Coat 008 — epoxy levelling filler under polymer floors
Before a polymer coating is laid, an uneven or porous substrate, including one after shot blasting, is levelled with LEVL Coat 008 epoxy filler. The thixotropic paste with quartz filler closes pores, cracks and potholes and evens out the colour of the substrate. It is applied with a flat steel trowel as a scrape coat over LEVL Coat 101 or 108 primer; it must not be thinned with solvent. Adhesion to the substrate is at least 2.5 MPa, service from −25 to +60 °C; 33 kg kit.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, retail and public buildings, warehouses and logistics |
| Base | epoxy resin + cycloaliphatic hardener; component A is a thixotropic paste with quartz filler |
| Colour | light grey |
| Packaging | kit A+B = 33 kg (A: 20 l metal pail, B: 3–5 l jerrycan); A : B = 10 : 1 (by weight) |
| Application method | thick levelling and pore-sealing filler layer in wall and floor coating systems (including after shot blasting) over LEVL Coat 101 / 108 primer: flat steel trowel as a scrape coat; slope no more than 2 %; must not be thinned with solvent |
| Application temperature | air +10…+30 °C (recommended +17…+23 °C); substrate +10…+30 °C (recommended +15…+25 °C); material +15…+25 °C; air humidity up to 80 %; substrate moisture no more than 5.0 % by weight; 3 °C above the dew point |
| Curing | recoat interval at +20 °C: minimum 24 h, maximum 48 h |
| Key properties | Adhesion to substrate at least 2.5 MPa (failure in the concrete); tensile strength at least 7 MPa; mix density 1.92 ± 0.1 kg/dm³; non-volatile content at least 97 %; pot life at least 30 min (+10 °C ~50, +20 °C ~30, +30 °C ~15 min); bridges cracks, pores and potholes, evens out the colour of the substrate; service temperature from −25 °C to +60 °C |
| Layer thickness | admissible 0.8–3.0 mm |
| Consumption | theoretical 1.92 kg/m² per 1 mm of thickness; example: 1.5 mm layer — 2.88 kg/m² |
| Shelf life | 12 months from the date of manufacture; storage at +5…+25 °C |
| Standards | TU 20.30.22-124-94613022-2023; substrate per SP 71.13330.2017 (cl. 8.12.2, Table 8.11), waterproofing per SP 29.13330.2011; test methods GOST 31992.1, GOST 31939, GOST 28574, GOST 11262-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 171 — methyl methacrylate primer for MMA systems
Fast-curing carboacrylate resin primer under LEVL Coat 573 and 271 systems; work is possible down to −10 °C with an accelerator.
Price on request
LEVL (INGRI)
LEVL Coat 573 — main layer of a methyl methacrylate floor with coloured sand
Highly filled carboacrylate coating for workshops, car parks, food and wet rooms; full strength gain in about one day at +20 °C.
Price on request
LEVL (INGRI)
LEVL Coat 106M — water-based epoxy primer for fresh and damp concrete
Solvent-free primer for concrete aged from 7 days and damp substrates, a temporary moisture barrier under polymer coatings.
Price on request
LEVL (INGRI)
LEVL Base 200 — acrylic primer under levelling compounds and cementitious floors
Aqueous acrylic dispersion for priming concrete before LEVL Self and CemPol: reduces substrate water absorption and improves adhesion.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER — antistatic polyurethane-cement floor
Conductive PU-cement coating with 10⁴–10⁶ ohm resistance for chemical plants, hangars, electronics and battery rooms.
Price on request