Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ZIVKON CR 7101 — chemical-resistant epoxy coating for floors and structures
LEVL (INGRI)

ZIVKON CR 7101 — chemical-resistant epoxy coating for floors and structures

Epoxy floors

ZIVKON CR 7101 epoxy coating with a cycloaliphatic hardener is designed for plants with high requirements for chemical and mechanical resistance. It is used to paint floors, walls and ceilings and to protect pipelines, equipment, steel and reinforced concrete structures against corrosion. The compound is self-priming and is applied by spraying, roller or brush; adhesion to concrete and steel is at least 2.5 MPa. The coating is water- and weather-resistant, operates from −40 to +80 °C and withstands +150 °C for short periods.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typeepoxy floors
Usechemically resistant, production workshops
Baseepoxy resin + cycloaliphatic hardener (two-component anti-corrosion coating)
ColourRAL colours; smooth uniform coating from gloss to semi-matt
Packagingkit A+B = 30 kg (A: 25 kg metal pail; B: 5 kg jerrycan or metal pail); A : B = 5 : 1 (by weight)
Application methodpainting of ceilings, walls and floors at facilities with high requirements for chemical and mechanical resistance; spraying, velour roller or brush, 2 or more coats (water tanks: at least 3); self-priming; on metal Sa 2 ½ (ISO 8501-1), roughness 20–40 µm
Application temperatureair and substrate +10…+30 °C (recommended +17…+23 °C); material +10…+30 °C; air humidity up to 80 %; 3 °C above the dew point
Curinglight loads: +10 °C 32 h, +20 °C 16 h, +30 °C 12 h; foot traffic 6 / 3 / 2 days; full loads 10 / 7 / 5 days; recoat interval 24–48 h at 20 °C; drying to degree 3 no more than 24 h at 20 °C
Key propertiesHigh chemical resistance; adhesion to concrete at least 2.5 MPa; adhesion to steel at least 2.5 MPa; impact strength at least 50 cm (GOST 4765); mix density 1.40 ± 0.05 kg/dm³; non-volatile content 67 ± 5 %; water- and weather-resistant; pot life at +25 °C about 8 h (+80 °C: 10 min); service temperature from minus 40 °C to +80 °C (short-term up to +150 °C)
Layer thicknessdry film thickness from 0.02 to 0.05 mm per coat
Consumption0.04 to 0.1 kg/m² per coat; theoretical 0.2 kg/m² for a coating thickness of 0.1 mm; priming on metal 0.10 kg/m², on concrete 0.30 kg/m²; finishing layer in 2–3 passes 0.20 kg/m²
Shelf life12 months from the date of manufacture; storage at +5…+30 °C
StandardsTU 20.30.12-128-94613022-2025; metal preparation per GOST 9.402, ISO 8501-1, ISO 8503-2; test methods GOST 31992.1, GOST 31939, GOST 19007, GOST 28574, GOST 4765

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)