Monopol TOP WD (wet to dry) — pourable topping for car parks and ramps
Pourable high-strength screed-topping for car parks, ramps and renovation of old concrete floors; flexural strength from 10 MPa.

The coarse quartz-corundum aggregate sets TOP MAX apart from the other mixes of the series and is designed for an intensive, very high regime of abrasion and impact loads. At 28 days the compressive strength reaches at least 80 MPa, the flexural strength 8.5 MPa, and abrasion is 0.10 g/cm². The mix is applied to fresh concrete and floated by machine, then coated with a sealer. Suitable for production workshops, warehouses, car parks, ramps and retail premises.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public |
| Base | coarse quartz-corundum aggregate |
| Colour | natural |
| Packaging | multi-wall paper bag 25 kg, 40 bags per pallet |
| Application method | dry application onto freshly laid concrete in 2 stages (60-65% + 35-40% of the consumption), floating with a power trowel with a disc, finishing with blades; curing — Monopol Sealer 2/2S/2T/2E 0.1 l/m² |
| Application temperature | application temperature from +5 to +25 °C |
| Curing | At substrate temperature +10/+20/+30 °C: foot traffic ≈20/≈15/≈10 h, putting into service ≈10/≈7/≈5 days, full strength gain 28 days (method statement table); in the specifications table: foot traffic after 24 h, light load (no more than 20 MPa) after 7 days |
| Key properties | Compressive strength at 28 days min. 80 MPa; flexural strength at 28 days min. 8.5 MPa; abrasion LKI-3M 0.10 g/cm²; impact (GOST 30353) at least 20 kg from a height of 1 metre; shrinkage max. 0.1%; max. particles 3.2 mm; bulk density 1870 kg/m³; NG |
| Layer thickness | thickness of the hardened layer 2 – 5 mm |
| Shelf life | 12 months from the date of manufacture |
| Standards | methods: GOST 30353, SP 28.13330.2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Pourable high-strength screed-topping for car parks, ramps and renovation of old concrete floors; flexural strength from 10 MPa.
Gloss epoxy self-levelling floor for workshops, warehouses, car parks and sales floors, resistant to abrasion, impact and chemicals; Shore D hardness 80.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.
Conductive epoxy floor for premises with explosive gases, dust and liquids, chemical and oil and gas facilities; resistance below 10⁶ Ω.
Hardening dustproofing impregnation with a water-repellent effect for concrete floors and screeds indoors and outdoors; applied to concrete aged 14 days or more.
Clear solvent-free epoxy resin for 3D floors and a protective, armouring layer in decorative coatings; odourless during application.