Monopol Sealer 2S — odourless water-based wax curing compound
Water-based wax emulsion for curing fresh concrete and toppings indoors: odourless, clear and matt after drying.

Monopol TOP WD is not a dry mix for working in but a pourable topping: the powder is mixed with water and laid as a high-strength layer on new and old concrete substrates, including sloped ones. It is chosen for car parks and ramps with intensive use, for floor renovation and for bringing the substrate to the design level. Flexural strength at least 10 MPa, abrasion 0.11 g/cm², foot traffic after 24 hours, light load after 7 days.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | toppings |
| Use | car parks and ramps, production workshops, warehouses and logistics, outdoor areas |
| Base | modified mix on a mineral filler (grey dry powder) |
| Colour | natural |
| Packaging | multi-wall paper bag 25 kg, 40 bags per pallet |
| Application method | mixed with water (quantity per the white label on the bag), pourable high-strength layer/screed on new and old concrete substrates, horizontal and sloped surfaces; curing — Monopol Sealer 2/2S/2T/2E 0.1 l/m²; pot life 20-30 minutes at +20 °C |
| Application temperature | application temperature from +10 to +30 °C |
| Curing | foot traffic after 24 h; light load (no more than 20 MPa) after 7 days; strength gain time 28 days |
| Key properties | Compressive strength: in the method statement 'after 1 day min. 60 MPa; after 28 days min. 30 MPa'; flexural strength at 28 days min. 10 MPa; abrasion LKI-3M 0.11 g/cm²; impact (GOST 30353) at least 20 kg from a height of 1 metre; max. particles 3.0 mm; bulk density 1800 kg/m³ |
| Layer thickness | 10 – 30 mm |
| Shelf life | 12 months from the date of manufacture |
| Standards | methods: GOST 30353, SP 28.13330.2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based wax emulsion for curing fresh concrete and toppings indoors: odourless, clear and matt after drying.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.
Gloss epoxy self-levelling floor for workshops, warehouses, car parks and sales floors, resistant to abrasion, impact and chemicals; Shore D hardness 80.
Water-based epoxy paint, primer and impregnation in one product for workshops and areas with chemical exposure; can be applied to a damp substrate.
Non-shrink pourable R4 repair mortar for industrial concrete and topping floors; 40 MPa after one day and 80 MPa at 28 days.
Self-levelling polyurethane-cement floor for car parks, wet production areas and food warehouses; compressive strength from 58 MPa, R10.