Monopol Epoxy 3W — water-based epoxy paint-primer for damp substrates
Water-based epoxy paint, primer and impregnation in one product for workshops and areas with chemical exposure; can be applied to a damp substrate.

The manufacturer positions Epoxy 3M as a budget epoxy floor paint. It is applied in two or more coats to concrete, terrazzo, polymer, polymer-cement and metal substrates, horizontally and vertically. The coating is gloss, grey and non-sparking; compressive strength after 7 days is 70 MPa, Taber abrasion 40 mg, and full loads are allowed after 72 hours. Suitable for workshops, warehouses, car parks and retail premises.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public |
| Base | epoxy resin, polyamine hardener, blend of organic solvents, pigments, fillers |
| Colour | grey |
| Packaging | 30 kg (A 27.2 kg + B 2.8 kg); 12 kg (A 10.9 kg + B 1.1 kg) |
| Application method | thin-layer paint in 2 or more coats, horizontal and vertical; concrete, terrazzo, polymer, polymer-cement and metal substrates |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate moisture no more than 4% by weight |
| Curing | full loads after 72 hours; drying to degree 3 at 23 °C no more than 6 h |
| Key properties | Compressive strength at 7 days 70 MPa; flexural strength at 7 days 15 MPa; Taber 40 mg; density 1.55 g/cm³; non-volatiles at least 83%; non-sparking; gloss |
| Consumption | 2.19 g/m² per 1 µm; mineral substrate: second and each subsequent coat no more than 175 g/m² (100 µm) |
| Shelf life | 12 months from the date of manufacture |
| Standards | certificate ROSS.RU.AZh49.N04910 (MONOPOL polymer floor coatings) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Water-based epoxy paint, primer and impregnation in one product for workshops and areas with chemical exposure; can be applied to a damp substrate.
Hardening dustproofing impregnation with a water-repellent effect for concrete floors and screeds indoors and outdoors; applied to concrete aged 14 days or more.
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.
Topping with quartz and synthetic corundum aggregate for intensive loads; abrasion 0.07 g/cm², the lowest in the TOP series.