Top 470 is a one-component alkyd-urethane primer-enamel that paints metal and concrete with a single material. For floors, the manufacturer offers it as economical painting of a concrete substrate under light or moderate loads. The matt coating is UV-resistant, dries to degree 3 in 1 hour at +20 °C, fully cures in 48 hours, and can be applied at temperatures from −30 to +35 °C. Adhesion to concrete at least 2 MPa, service from −60 to +110 °C.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | varnishes and finishing coats |
| Base | one-component matt UV-resistant alkyd-urethane primer-enamel; non-volatiles 57; 60 % (±3) |
| Colour | matt |
| Packaging | Euro pail 20 kg |
| Application method | painting of metal and concrete, incl. 'economical painting of a concrete floor substrate under light or moderate load'; spraying (airless/pneumatic), brush, roller; thinning with xylene up to 10 % (up to 20 % by agreement); next coat after drying to tack-free |
| Application temperature | from -30 to +35 °C; relative humidity no more than 80 % |
| Curing | drying to degree 3 at (20±2) °C no more than 1 h; interval before the next coat at least 1 h; full cure 48 h |
| Key properties | Adhesion to concrete at least 2 MPa (GOST 28574); adhesion to steel no more than 1 point; film impact strength at least 50 cm; flexural elasticity no more than 1 mm; service -60…+110 °C; resistance to water and mineral oil at least 48 h; density 1.4 g/cm3 |
| Layer thickness | 60-80 µm (one coat) |
| Consumption | 0.240-0.320 kg/m2 per coat (theoretical) |
| Shelf life | 12 months; storage and transport -40…+40 °C |
| Standards | TU 2313-101-72746455-2016 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Deep-penetrating primer for dustproofing and hardening concrete floors and under TAIKOR Elastic 300 waterproofing; application from −10 °C.
Epoxy self-levelling compound for floors in workshops, warehouses, car parks, medical, food and children's facilities; abrasion to ASTM D 4060 up to 49 mg.
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Epoxy primer-enamel for thin-layer polymer floors in car parks, warehouses and cold stores, as well as steel; application from −10 °C.
Coloured thin-layer floor of TAIKOR Primer 150 primer-enamel and Top 425 enamel for production premises with dry and wet processes.
Epoxy self-levelling floor system based on TAIKOR Primer 160 and Floor 710 for sales floors, medicine, schools, car parks, warehouses and food workshops.
