GLIMS
GLIMS® PRO CRT-20 — thixotropic R2 mortar for non-structural repair
Thixotropic R2 mortar with fibre for filling voids, caulking joints, repairing manholes and tanks; compressive strength from 20 MPa at 28 days, W8.
Price on request
GLIMS
GLIMS® PRO FS TOP 450 — corundum topping for industrial floors
TOP 450 is a corundum topping for the heaviest duty: open and closed warehouses, car parks, workshops, car service stations, production halls and retail areas. The cement-bound mix is trowelled into freshly laid concrete with power trowels, together with GLIMS Cure-A curing compound where necessary. Compressive strength after 28 days is at least 60 MPa, abrasion to GOST 13087 is 0.5 g/cm², service range −50…+120 °C.
Specifications
| Manufacturer | GLIMS — AO “GLIMS-Production”, Podolsk |
|---|---|
| Type | toppings |
| Use | warehouses and logistics, car parks and ramps, production halls, retail and public, outdoor areas |
| Base | cement-bound dry mix with corundum filler |
| Colour | grey / dark grey; RAL tinting in dark shades |
| Packaging | kraft paper bags 25 kg |
| Application method | trowelled into freshly laid concrete (for heavy loads — class B25 and above) with power trowels in two passes (2/3 + 1/3), with GLIMS Cure-A curing compound up to 0.2 l/m² where necessary; joint cutting after 2–3 days, bays not larger than 6×6 m |
| Application temperature | +5…+35 °C |
| Curing | cutting of movement joints 2–3 days after trowelling |
| Key properties | 28-day compressive strength at least 60 MPa; abrasion (GOST 13087) 0.5 g/cm²; maximum filler fraction 2 mm; service temperature −50…+120 °C; “extremely high abrasion resistance” |
| Consumption | 4–6 kg/m² |
| Shelf life | 12 months from the date of manufacture in undamaged packaging in a dry room |
| Standards | abrasion to GOST 13087 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO CRT-60 — thixotropic R4 mortar for structures under increased loads
Thixotropic R4 repair mortar for bridges, tunnels, cooling towers and flue ducts under static and dynamic loads; 60 MPa, W18.
Price on request
GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
Rapid-hardening flowable R4 mortar for fast-track repair of bridges, tunnels and industrial floors, including at −10 °C; 10 MPa after 2 hours.
Price on request
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO CRT-40 — thixotropic R3 mortar for local structural repair
Thixotropic R3 mortar for repairing concrete of B20 and above on walls and ceilings without formwork: bridges, tunnels, car parks; 40 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request