Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-MB1 Fluat — fluating impregnation for hardening concrete floors
ELAKOR

Elakor-MB1 Fluat — fluating impregnation for hardening concrete floors

Concrete impregnations and hardeners

This fluorosilicate-based fluat densifies the surface layer of concrete, screeds, plaster and calcium-containing stone — limestone, marble, dolomite. According to the manufacturer, it increases the grade strength of concrete by 30–50 % and the wear resistance of the surface 2–3 times, dust-proofs it, prevents efflorescence and preserves vapour permeability. The concentrate is diluted with water 3:1 by volume and applied once for the entire service life; the material is non-combustible (group NG, class KM0) and suitable for warehouses, workshops, garages, food production and outdoor areas.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeconcrete impregnations and hardeners
Usewarehouses and logistics, production workshops, car parks and ramps, food and pharmaceutical, outdoor areas
Basewater-based fluating compound (fluorosilicates), concentrate; without organic solvents
Colourcolourless liquid
Packagingplastic canister 30 l
Application methodIncreasing the strength, dust-proofing and improving the chemical resistance of the surface layer of concrete, screeds, plaster and calcium-containing minerals (limestone, marble, dolomite); prevention of efflorescence. The concentrate is diluted: 3 parts water to 1 part concentrate (by volume). Clean the surface, remove loose areas with wire brushes, open the concrete pores. New and old concretes; applied once for the entire service life. Together with MB2 (sealing) and MB4 (water repellency).
Application temperaturefrom 0 to +25°C
Key propertiesnon-volatile content by weight at least 33%; density 1.3 kg/l; increases the grade strength of concrete by 30-50%; increases the wear resistance of the concrete surface 2-3 times; the surface remains vapour-permeable; combustibility group “NG” according to the fire certificate; fire safety certificate “Elakor-MB” class KM0
Consumptionready-to-use solution / concentrate per 1 m²: concrete M350 and above – 0.6 / 0.15 l; concrete M250..M350 – 0.8 / 0.2 l; concrete below M250 – 1.0 / 0.25 l; limestone (rubble) – 0.6...1.0 / 0.15-0.25 l; marble, dolomite – 0.2 / 0.05 l; brickwork – 0.6...1.0 / 0.15-0.25 l
Shelf life3 years in the manufacturer's original packaging; store and transport at temperatures from –50°C to 40°C (properties unchanged after freezing/thawing)
StandardsCertificate of conformity (fire safety) “Elakor-MB” Class KM0

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR