REKS
REKS® AKRILIK ELAST VN — acrylic polymer concrete for expansion joints and slab edges
Rapid-hardening highly filled acrylic polymer concrete with a reduced modulus of elasticity for expansion joints, slab edges and sleepers.
Price on request
REKS
REKS® Graut M — flowable non-shrink R4 grout for machine bases and anchors
Machine bases, fixing of beams and columns, fixing of bolts, anchors and embedded parts, and injection into cavities and ducts are the works REKS® Graut M is intended for. It is a non-shrink highly flowable cementitious mortar of class R4 per GOST R 56378; flowability is retained for at least 30 minutes. Compressive strength is from 30 MPa after one day and 60 MPa at 28 days, bond to the substrate at least 2.1 MPa, freeze-thaw resistance F2 400, water impermeability W16.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams |
| Base | non-shrink cementitious repair mortar with high flowability |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | installation of machine bases and fixing of beams and columns; fixing of bolts, anchors and embedded parts; injection into cavities and ducts |
| Application temperature | not below +5 °C |
| Curing | protection from precipitation for at least 24 h; in hot and windy weather — water spraying and covering with film |
| Key properties | modulus of elasticity: ≥25,000 MPa; density of hardened mortar: 2.3 ± 5 % t/m³; freeze-thaw resistance: F2 400; bond to substrate at 28 days: ≥2.1 MPa; water impermeability: W16; compressive strength at 28 days: ≥60 MPa; flexural strength at 1 day: ≥4 MPa; flexural strength at 28 days: ≥7 MPa; bond to substrate at 28 days after 50 freeze-thaw cycles in salts: ≥2.0 MPa; aggregate size: 1.25 mm; flowability retention: ≥30 minutes; flowability (mortar flow trough): 400–500 mm; compressive strength at 1 day: ≥30 MPa; capillary water absorption: no more than 0.4 kg/(m²·min⁰·⁵); sulphate resistance coefficient (365 days): 0.982 % |
| Shelf life | 12 months from the date of manufacture |
| Standards | class R4 per GOST R 56378 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® Strukto 300 — rapid-setting R4 mortar for repair and joint filling
Thixotropic class R4 cementitious mortar for fast concrete repair and joint filling in industrial buildings and tunnels; from 30 MPa after one day.
Price on request
REKS
REKS® AR FM — R4 repair mortar for wet spraying, supplied with fibre
Thixotropic class R4 mortar for repairing bridges, tunnels and columns by spraying or trowel; each bag comes with a pail of fibre, flexure from 12 MPa.
Price on request
REKS
REKS® StruktoLit — expanding cementitious binder for injection grouts and concrete
Highly flowable expanding binder for shrinkage-compensated mortars and concrete: repair of roads, airfields, bridges and masonry; 20 kg bag.
Price on request
REKS
REKS® Strukto 60 — fibre-reinforced thixotropic R4 repair mortar, 60 MPa
Non-shrink fibre-reinforced R4 mortar for repairing bridges, tunnels, dams and columns; compressive strength at 28 days at least 60 MPa.
Price on request
REKS
REKS® Strukto R3 — rapid-setting class R3 mortar for repair and levelling
Non-shrink fibre-reinforced R3 mortar for repair, finishing and local levelling of concrete, including precast elements; 35 MPa at 28 days.
Price on request