REKS
REKS® OL — lightweight thixotropic R3 mortar for repairing soffits
Non-shrink lightweight cementitious R3 mortar for overhead surfaces and extensive concrete damage; density of the hardened mortar 1.5 t/m³.
Price on request
REKS
REKS® Fiks Epo T/VN ESh — two-component epoxy grout, 98 MPa in 7 days
Unlike the three-component grouts of the T/VN range, REKS® Fiks Epo T/VN ESh is a two-component compound: component A is a grey paste weighing 24 kg, component B weighs 3 kg. The high-strength epoxy resin grout is used for base plates and bridge bearings, mechanical connections, screeds with very high loads, fixing rails in sleeperless track and anchoring bars, studs and bolts. Compressive strength is at least 70 MPa after one day and 98 MPa after 7 days, the pot life at +20 °C is about 60 minutes.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | epoxy grouts |
| Use | equipment foundations, anchoring of rebar and bolts, bridges and overpasses, tunnels and metro, floors |
| Base | two-component high-strength epoxy resin-based grout (component A — grey paste) |
| Colour | grey |
| Packaging | kit 27 kg: component A 24 kg, component B 3 kg (metal pails) |
| Application method | construction of supports under metal bearing plates, precise setting of base plates, construction of bridge bearings and mechanical connections; construction of screeds in premises with very high loads and heavy traffic; fixing of rails in sleeperless track; as a high-strength grout and for anchoring rebar, anchors, studs, bolts and tie rods |
| Application temperature | components at about +20 °C before use; surface 3 °C above the dew point |
| Curing | pot life at +20 °C about 60 min |
| Key properties | adhesion to concrete: exceeds the cohesion of concrete; adhesion to metal: at 7 days ≥6 MPa; compressive strength at 7 days: ≥98 MPa; freeze-thaw resistance at 7 days: ≥F200; flexural strength: at 7 days ≥25 MPa; density of the mixed compound: ≥1.75 g/cm³; compressive strength at 1 day: ≥70 MPa; modulus of elasticity: at 7 days ≥5,000 MPa; gel time: ≥90 minutes; water absorption: at 1 day ≤0.4 % |
| Shelf life | 16 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® StruktoLit — expanding cementitious binder for injection grouts and concrete
Highly flowable expanding binder for shrinkage-compensated mortars and concrete: repair of roads, airfields, bridges and masonry; 20 kg bag.
Price on request
REKS
REKS® Strukto 70 — thixotropic R4 repair mortar, 70 MPa, W20
Fibre-reinforced R4 repair mortar for bridges, dams, tunnels and columns with compressive strength from 70 MPa and water impermeability W20.
Price on request
REKS
REKS® Fiks Epo T/VN 100 — high-strength epoxy grout with freeze-thaw resistance F1 500
High-strength three-component epoxy grout for bridge bearings, equipment and rails; 80 MPa after just one day in flowable consistency.
Price on request
REKS
REKS® AKRILIK ELAST VN — acrylic polymer concrete for expansion joints and slab edges
Rapid-hardening highly filled acrylic polymer concrete with a reduced modulus of elasticity for expansion joints, slab edges and sleepers.
Price on request
REKS
REKS® R4 — mortar for structural repair of reinforced concrete, 60 MPa
Fibre-reinforced thixotropic class R4 mortar for structural repair of reinforced concrete on vertical, horizontal and overhead surfaces.
Price on request