Pakol
Pakol Litevoy BK — rapid-hardening flowable mix for the off-season, −10…+7 °C
Off-season flowable mortar for autumn and spring: placing at −10…+7 °C, 15.0 MPa after 2 h, class B50 — for floors, roads and airfields.
Price on request
Pakol
Pakol Remontny Zima 400 M — fine-grained antifreeze R3 mix, to −10 °C
A winter fine-grained option for non-structural repair: the maximum grain size is 1 mm, the mix contains an antifreeze admixture, and it can be applied down to −10 °C without heating. The thixotropic material with polymer fibre is used on walls, columns, beams and ceilings of industrial buildings to fill small spalls and gouges. To GOST R 56378-2015 — class R3, 18.0 MPa in compression after 24 h, 40.0 MPa after 28 days (B30), bond to substrate 2.0 MPa.
Specifications
| Manufacturer | Pakol — OOO “NPO Pakol”, Vysokaya Gora |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Dry construction mix with polymer fibre and an antifreeze admixture, fine-grained, non-shrink, thixotropic type, on a cement binder, with a maximum grain size of 1 mm |
| Packaging | 25 kg bags (three-ply with a polyethylene liner) |
| Application method | For non-structural repair of overhead, inclined and vertical surfaces with local damage (spalls, gouges, etc.) up to 20 mm deep at low positive and negative (down to -10 °C) air temperatures |
| Application temperature | down to −10 °C without heating |
| Key properties | aggregate size, mm: 1.0; mixing water, l per 1 kg: 0.15…0.17; workability retention, min: 40; workability: cone penetration 4–8 cm (Pk2), spread 170-190 mm; bond strength to substrate, MPa: 2.0; strength after 24 h: flexural 4.0 / compressive 18.0 MPa; strength after 28 days: flexural 7.0 (Btb5.2) / compressive 40.0 (B30) MPa; modulus of elasticity, GPa: 18.0; sulphate resistance group: III; contact zone frost resistance: Fkz 75; frost resistance: F1 300, F2 150; watertightness: W14 |
| Shelf life | 12 months from the date of manufacture; storage at -40…+50 °C, humidity no more than 70 % |
| Standards | Pk2, B30, Btb5.2, W14, F1 300 to GOST 31357-2007 (taking into account the requirements of GOST R 56378-2015, class R3); TU 23.64.10-002-76310469-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Pakol
Pakol
Pakol Remontny Zima 400 K — antifreeze R3 mortar for non-structural repair
Coarse-grained R3 mix with an antifreeze admixture for non-structural repair of walls, columns and ceilings down to −10 °C without heating.
Price on request
Pakol
Pakol Remontny 600 KS — steel-fibre mortar for vibration-loaded structures
Mix with steel and polypropylene fibre for repair and strengthening of structures under dynamic and vibration loads; flexural strength 11.0 MPa (Btb8.0).
Price on request
Pakol
Pakol Litevoy Zima 800 K — self-levelling winter mix, B70
High-strength self-levelling B70 mix for winter repair of industrial floors and roads down to −20 °C; 55.0 MPa after just 24 h.
Price on request
Pakol
Pakol Epoks P — three-component epoxy grout for equipment
Flowable epoxy grout for high-precision installation and anchoring of industrial equipment on foundations; effective contact area at least 85 %.
Price on request
Pakol
Pakol Remontny Zima 600 K — coarse-grained winter R4 mortar, 20.0 MPa in 2 h
Winter B45 mix for urgent filling of spalls and cavities on walls and ceilings of dams and tanks without heating down to −20 °C; 20.0 MPa after 2 h.
Price on request