INDASTRO
LEVELINE FC70 S quartz dry-shake topping — hardening fresh concrete floors
Dry quartz mix for hardening freshly laid concrete in workshops, warehouses and car parks; compressive strength from 70 MPa at 28 days.
Price on request
INDASTRO
Profskrin RC35 Sm — fibre-reinforced mortar for repair and finishing of concrete
Profskrin RC35 Sm combines two tasks: structural repair and finishing of concrete structures. It is based on Portland cement, graded sand with particle size up to 0.63 mm and fibre. The mortar is suitable for load-bearing and bridge structures, treatment and industrial facilities, underground ducts and pipelines; compressive strength from 15 MPa after 24 hours and from 35 MPa after 28 days, water impermeability W12, frost resistance F1 1000 and F2 300.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tanks and treatment plants, industrial buildings, columns and beams |
| Base | Portland cement, graded sand with particle size up to 0.63 mm, fibre, modifying admixtures |
| Packaging | bags 25 kg |
| Application method | Profskrin RC35 Sm repair mortar is used for structural repair and finishing of concrete structures: Load-bearing building structures; Bridge structures; Treatment facilities; Underground engineering structures; Industrial structures |
| Application temperature | +5…+30 °C |
| Key properties | mixing water: 0.16; compressive strength at 24 h: ≥15 MPa; compressive strength at 28 days: ≥35 MPa; flexural strength at 28 days: ≥5 MPa; bond strength to substrate: ≥1.5 MPa; workability retention: 60 min; frost resistance: ≥F1 1000, F2 300 cycles; water impermeability: W12; maximum aggregate size, mm: 0.63 |
| Shelf life | 12 months in the original factory packaging from the date of manufacture, in a dry room |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Khimskrin SE 2k — epoxy protective compound for treatment plants and sewers
Two-component epoxy coating protecting concrete of treatment plants and sewers against sulphuric acid and hydrogen sulphide; contact with drinking water is permitted.
Price on request
INDASTRO
LEVELINE FP860 polyurethane self-levelling floor — elastic solvent-free coating
Elastic polyurethane self-levelling floor for workshops, warehouses, offices and schools; elongation at break from 40%, service from −60 to +80 °C.
Price on request
INDASTRO
Profskrin RC45 — R4 repair mortar for B30–B40 concrete structures
Thixotropic R4 mortar for repairing B30–B40 concrete and reinforced concrete structures, including walls and ceilings; compressive strength at 28 days from 45 MPa.
Price on request
INDASTRO
Profskrin RC35 — thixotropic R3 repair mortar for concrete and reinforced concrete
Thixotropic R3 cementitious mortar for structural repair of concrete and reinforced concrete in industrial buildings; compressive strength at 28 days from 35 MPa.
Price on request
INDASTRO
INDASTRO LEVELINE FK891 curing compound for freshly laid concrete — solvent-free
Water-based polyurethane-acrylic curing compound for fresh concrete and toppings in workshops, warehouses and outdoor areas; dries in up to 3 hours at +20 °C.
Price on request