GLIMS
GLIMS® PRO CRF-60 — flowable R4 mortar for damp and aggressive conditions
Fibre-reinforced flowable R4 mortar for repairing concrete under high humidity, loads and in aggressive environments; 60 MPa, W18, F2 400.
Price on request
GLIMS
GLIMS® PRO CRP-40 0.5 — finishing thixotropic R3 mortar for restoring geometry
The non-shrink finishing mix GLIMS® PRO CRP-40 0.5, class R3 to GOST R 56378, is intended for finishing and restoring the geometry of concrete and stone surfaces: vertical, overhead and horizontal. It is also used to repair dormant cracks wider than 2 mm, and the manufacturer permits contact of the material with drinking water. Compressive strength is 15 MPa after one day and 40 MPa after 28 days, flexural from 8 MPa, adhesion from 1.5 MPa, water impermeability W12, frost resistance F2 300.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | thixotropic repair mortars |
| Use | tanks and treatment plants, industrial buildings |
| Base | Non-shrink finishing thixotropic mix based on special cements, graded sand, mineral fillers and chemical admixtures |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | Finishing and restoring the geometry of concrete and stone surfaces (vertical, overhead, horizontal); repair of dormant cracks wider than 2 mm; contact with drinking water is permitted |
| Key properties | mixing water: 0.17–0.18 l per 1 kg; pot life: 30 min; adhesion: ≥1.5 MPa; compressive strength at 1 / 28 days: ≥15 / ≥40 MPa; flexural strength: ≥8 MPa; frost resistance: F2 300; water impermeability: W12 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R3 to GOST R 56378; TU 5745-010-40397319-2003 No. 0500/8 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
Non-shrink flowable R3 mortar with fibre for strengthening horizontal bases and filling voids under foundations; 40 MPa, W14.
Price on request
GLIMS
GLIMS® PRO Protection — anti-corrosion rebar protection and bonding primer
Elastic cement-polymer mix with corrosion inhibitors for protecting steel reinforcement and forming a bond coat before repair; 4 kg pail.
Price on request
GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request
GLIMS
GLIMS® PRO FS TOP 450 — corundum topping for industrial floors
Dry corundum hardening mix for concrete floors under extreme mechanical, impact and abrasive loads; up to +120 °C.
Price on request