GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
Quartz hardening topping for floors under moderate and significant loads: warehouses, car parks, car service stations, production halls and retail areas.
Price on request
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
The high-strength non-shrink flowable mix GLIMS® PRO ANCHOR, class R4 to GOST R 56378, is used to install anchors, for high-precision installation and fixing of process equipment and for grouting under bearings. It is also used for monolithic joining of reinforced concrete elements, pouring heavily reinforced structures and underwater concreting, and contact with drinking water is permitted. After one day the mix reaches 40 MPa in compression, after 28 days 80 MPa, and with crushed stone added it yields concrete with strength up to 100 MPa; water impermeability W18, frost resistance F2 400.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | cementitious grouts |
| Use | equipment foundations, anchoring of rebar and bolts, columns and beams, tanks and treatment plants |
| Base | High-strength non-shrink flowable mix based on special cements, graded sand, mineral fillers and chemical admixtures |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | Installation of anchors, high-precision installation and fixing of process equipment (grouting under equipment and bearings), monolithic joining of reinforced concrete structural elements, pouring of heavily reinforced structures, underwater concreting; contact with drinking water is permitted |
| Key properties | maximum aggregate size: 3 mm; mixing water: 0.12–0.14 l per 1 kg; pot life: 30 min; adhesion: ≥2.0 MPa; modulus of elasticity: ≥20,000 MPa; compressive strength at 1 / 28 days: ≥40 / ≥80 MPa; flexural strength: ≥10 MPa; frost resistance: F2 400; water impermeability: W18; with crushed stone added — concrete up to 100 MPa |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R4 to GOST R 56378; TU 5745-010-40397319-2003 No. 0440/14 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO Cure-A — curing impregnation for concrete
Waterborne acrylate curing impregnation: retains moisture in fresh concrete, dustproofs and hardens finished floors.
Price on request
GLIMS
GLIMS® PRO FS Screed 1K — high-strength cement floor screed
High-strength M400 cement screed for production halls, warehouses, car parks and car service stations, including unheated ones; walkable after 24 h.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request
GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
Non-shrink flowable R3 mortar with fibre for strengthening horizontal bases and filling voids under foundations; 40 MPa, W14.
Price on request
GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request