GLIMS
GLIMS® PRO FS TOP 100 — quartz topping for concrete floors
Quartz hardening topping for floors under moderate and significant loads: warehouses, car parks, car service stations, production halls and retail areas.
Price on request
GLIMS
GLIMS® PRO Protection — anti-corrosion rebar protection and bonding primer
Steel reinforcement and embedded parts are protected against corrosion by GLIMS® PRO Protection, a one-component elastic cement-polymer mix with corrosion inhibitors. The same material serves as a bonding primer: before cementitious repair mortars are placed it forms a bond coat on steel and concrete. Adhesion to steel is at least 1.0 MPa, to concrete from 1.5 MPa, pot life 60 minutes, frost resistance of the contact zone Fkz 75; supplied in 4 kg pails.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | rebar protection and bonding compounds |
| Use | columns and beams, tanks and treatment plants |
| Base | One-component elastic cement-polymer mix with corrosion inhibitors |
| Colour | grey |
| Packaging | pail 4 kg |
| Application method | Corrosion protection of steel reinforcement and embedded parts; bonding primer (bond coat) on steel and concrete before placing cementitious repair mortars |
| Application temperature | +5…+35 °C |
| Key properties | mixing water: 0.23–0.25 l per 1 kg; pot life: 60 min; adhesion to steel: ≥1.0 MPa; to concrete: ≥1.5 MPa; water impermeability: W2; frost resistance of the contact zone: Fkz 75 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | TU 5745-010-40397319-2003 No. 0430/5 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO CRF-60 — flowable R4 mortar for damp and aggressive conditions
Fibre-reinforced flowable R4 mortar for repairing concrete under high humidity, loads and in aggressive environments; 60 MPa, W18, F2 400.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request
GLIMS
GLIMS® PRO FS Screed 1K — high-strength cement floor screed
High-strength M400 cement screed for production halls, warehouses, car parks and car service stations, including unheated ones; walkable after 24 h.
Price on request
GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
Rapid-hardening flowable R4 mortar for fast-track repair of bridges, tunnels and industrial floors, including at −10 °C; 10 MPa after 2 hours.
Price on request