NEOFLAME 517 RA weather-resistant fire protection compound
Weather-resistant fire protection compound for steel up to R120 (cellulosic fire), works outdoors without a finishing enamel; 25 kg euro pail.
For reinforced concrete, the VUP range has a dedicated paint, VUP-2B. It gives concrete structures fire resistance up to REI150 and is used indoors in a non-aggressive environment and under a canopy at humidity not above 85 %. The surface is pre-treated with GKZh-11 or SOFEXIL-40 water repellent or UKhRA-0501 primer. Before being put into service, the coating is cured for at least 5 days at temperatures above +15 °C and up to 15 days at lower temperatures; indoors the coating serves for 25 years, under a canopy for 10 years or more.
| Manufacturer | NEOFLAME (Teplokhim) — OOO NPP TEPLOKHIM, Dmitrov |
|---|---|
| Fire protection performance | up to REI150 (concrete structures) |
| Application | concrete and reinforced concrete |
| Service conditions | indoors in a non-aggressive environment and outdoors under a canopy; humidity not above 85 %, from −60 °C to +60 °C |
| Base | polyvinyl acetate dispersion, fire retardants, fillers, water |
| Colour | white, tinting in pastel shades permitted |
| Packaging | polyethylene drum, 50 kg |
| Application temperature | not below +5 °C; humidity not above 85 % |
| Drying | intercoat 6 h at 20 °C; curing before service at least 5 days (above +15 °C) or up to 15 days (below +15 °C) |
| Compatible primers and topcoats | before application: GKZh-11, SOFEXIL-40 water repellents or UKhRA-0501 primer |
| Shelf life | 12 months; storage and transport not below +1 °C |
| Standards | TU 2316-032-66828143-2016 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Weather-resistant fire protection compound for steel up to R120 (cellulosic fire), works outdoors without a finishing enamel; 25 kg euro pail.
Solvent-borne fire protection paint for steel structures up to R120, applied at temperatures down to −15 °C.
Water-based kaolin fire protection mastic for steel structures, up to R120; sprayed with forced-feed units.
Water-emulsion intumescent paste for fire protection of steel structures inside buildings, up to R45; kit of paste and ammophos.
Two-component thick-film silane-based fire protection compound for steel and concrete in open industrial atmosphere up to C5-I/C5M.
EI30 fire protection system for air ducts: NATRSIL-S 541 adhesive compound and Folma-Kholst KhF foil-faced thermal insulation fabric.