INDASTRO
LEVELINE FE850 two-component epoxy primer — for polymer floors
Solvent-free epoxy primer for self-levelling and decorative polymer floors, also a stand-alone impregnation; adhesion to concrete from 2.5 MPa.
Price on request
INDASTRO
Profskrin RC45-1.25 — thixotropic R4 mortar with fine 1.25 mm aggregate
The index 1.25 in the designation Profskrin RC45-1.25 is the aggregate size in millimetres: it is smaller than in the basic RC45 mortar, with the same class R4. The thixotropic mix is intended for structural repair of concrete structures, columns and beams of industrial buildings. After 24 hours it reaches from 20 MPa in compression, after 28 days from 45 MPa, bond to the substrate at least 2 MPa, water impermeability W16, frost resistance F1 1000.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus, Kolomna, Ulyanovsk, Nevinnomyssk |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Portland cement, mineral filler, modifying admixtures. |
| Packaging | paper bags 25 kg |
| Application method | Profskrin RC45-1.25 thixotropic-type repair mortar is used for structural repair of concrete structures. |
| Application temperature | +5…+30 °C |
| Curing | protection against moisture loss for at least 24 h (water spraying or wet hessian) |
| Key properties | mixing water: 3.0-3.5 (Kolomna (K)); maximum aggregate size, mm: 1.25; workability (cone spread): 120 – 140 mm; workability retention: 30 min; flexural strength at 24 h: ≥3 MPa; flexural strength at 28 days: ≥6 MPa; compressive strength at 24 h: ≥20 MPa; compressive strength at 28 days: ≥45 MPa; bond strength to substrate: ≥2 MPa; linear expansion/shrinkage: ≤0.8 mm/m; service in aggressive environments: 5< pH <14; frost resistance: F1 1000; frost resistance (road and airfield concrete, mineralised medium): F2 300; water impermeability: W16; service temperature: -60…+80 °C |
| Shelf life | 12 months in paper packaging, 24 months in plastic packaging from the date of manufacture, in a dry room |
| Standards | class R4 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FC830 finishing self-levelling floor — cement-based self-levelling compound
Cement self-levelling floor for workshops, warehouses and public buildings, and a base for polymer coatings; walkable after 3 hours.
Price on request
INDASTRO
Profskrin RC40 FSm — winter finishing mortar for fine finishing of concrete
Fibre-reinforced finishing mortar for fine finishing of concrete structures in winter at temperatures from −10 to +10 °C; compressive strength 40 MPa at 28 days.
Price on request
INDASTRO
Profskrin RC462 I — expanding cementitious compound for injection and anchoring
Finely dispersed expanding cementitious compound for injection grouts, filling voids and cracks, anchors and equipment installation; 60 MPa.
Price on request
INDASTRO
Profskrin RC60 RLq — high-strength flowable R4 mortar for heavily reinforced structures
Non-shrink flowable R4 mortar with fibre for heavily reinforced areas, bridges, roads, airfields and joints; 60 MPa at 28 days, work from −10 °C.
Price on request
INDASTRO
Innolayn NC610 — high-strength cementitious grout with water impermeability W20
Cementitious grout for installing equipment, column bases, joints and anchors; 70 MPa in compression at 28 days, W20, workability from 45 minutes.
Price on request