GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
Rapid-hardening flowable R4 mortar for fast-track repair of bridges, tunnels and industrial floors, including at −10 °C; 10 MPa after 2 hours.
Price on request
GLIMS
GLIMS® PRO CRT-40 — thixotropic R3 mortar for local structural repair
For local structural repair of concrete and reinforced concrete with strength not lower than B20, GLIMS® PRO CRT-40 is suitable: a thixotropic mortar of class R3 to GOST R 56378-2015. It is placed without formwork on vertical, inclined, horizontal and overhead surfaces of bridges, bridge spans, tunnels, car parks, viaducts and equipment foundations, as well as port and hydraulic structures, chimneys and cooling towers. Compressive strength is 15 MPa after one day and 40 MPa after 28 days, adhesion from 1.5 MPa, W12, F2 300.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | thixotropic repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, industrial buildings, equipment foundations |
| Base | Non-shrink thixotropic mix of special cements, graded sand, mineral aggregates and chemical admixtures, with polymer fibre |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | Local structural repair of concrete and reinforced concrete (of strength not lower than B20) on vertical, inclined, horizontal and overhead surfaces without formwork: elements of bridges, bridge spans, tunnels, car parks, viaducts, industrial floors, equipment foundations; port and hydraulic structures |
| Key properties | maximum aggregate size: 3 mm; mixing water: 0.16–0.17 l per 1 kg; pot life: 30 min; adhesion: ≥1.5 MPa; modulus of elasticity: ≥15,000 MPa; compressive strength at 1 / 28 days: ≥15 / ≥40 MPa; flexural strength: ≥8 MPa; frost resistance: F2 300; water impermeability: W12 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R3 to GOST R 56378-2015; TU 5745-010-40397319-2003 No. 0500/2 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® PRO Cure-A — curing impregnation for concrete
Waterborne acrylate curing impregnation: retains moisture in fresh concrete, dustproofs and hardens finished floors.
Price on request
GLIMS
GLIMS® PRO ANCHOR-T — R4 anchoring grout with aggregate up to 0.5 mm for small gaps
Thin-layer non-shrink flowable R4 grout for anchoring in small gaps and hard-to-reach places; aggregate up to 0.5 mm, 60 MPa.
Price on request
GLIMS
GLIMS® PRO CRF-60 — flowable R4 mortar for damp and aggressive conditions
Fibre-reinforced flowable R4 mortar for repairing concrete under high humidity, loads and in aggressive environments; 60 MPa, W18, F2 400.
Price on request
GLIMS
GLIMS® PRO CRF-40 — flowable R3 repair mortar for pouring and placing in formwork
Non-shrink flowable R3 mortar with fibre for strengthening horizontal bases and filling voids under foundations; 40 MPa, W14.
Price on request
GLIMS
GLIMS® PRO CRT-60 — thixotropic R4 mortar for structures under increased loads
Thixotropic R4 repair mortar for bridges, tunnels, cooling towers and flue ducts under static and dynamic loads; 60 MPa, W18.
Price on request