Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
CarbonWrap

CarbonWrap® Resin WS+ epoxy saturating resin (for damp surfaces) — underwater installation

Composite strengthening

If the substrate cannot be dried, the CarbonWrap external reinforcement system is installed with Resin WS+ saturating resin: it is used only on damp concrete, reinforced concrete, masonry and metal surfaces, and under water. Carbon tapes and fabrics are impregnated with it by hand, and it also serves as the primer in the “wet” method; the components are mixed 2:1 by volume and by weight and applied by roller, spatula or brush. The pot life is at least 30 min at 20 °C, the bond to concrete at least 2.5 MPa, and resistance to oils is stated.

Specifications

ManufacturerCarbonWrap — OOO “Nanotekhnologicheskiy tsentr kompozitov”, Moscow
Typecomposite strengthening
Basetwo-component epoxy saturating resin: component A — thixotropic blend of epoxy resins, reactive diluents, fillers, pigments and functional additives; component B — polyamine hardener with filler and additives; solvent-free
Colourcomponent A — light yellow; component B — brown; mix — light grey
Packagingcomponent A — 10 kg pails, component B — 5 kg pails
Application methodinstallation of the CarbonWrap external reinforcement system on damp concrete, reinforced concrete, masonry and metal surfaces and under water; hand impregnation of carbon tapes and fabrics; primer resin for the “wet” method; used only on damp surfaces; A:B = 2:1 by volume and by weight; mixing with a low-speed mixer at 300–400 rpm with a paddle for 5 min, especially at the bottom and walls, until uniformly light grey, then 1 min at low speed to reduce air entrainment; applied by roller, spatula or brush; bubbles may appear on the surface during curing — remove them (if there is no sand broadcast)
Application temperatureair +10…+35 °C; relative humidity no more than 80 %
Curingfull cure 7 days at 20 °C
Key propertiesdynamic viscosity, Brookfield RVT at 25 °C, 20 rpm: A (N=4) 3–10, B (N=3) 1–5 Pa·s; mix density at 20 °C no more than 1.20 g/cm3; pot life at least 30 min at 20 °C (30 min at 25 °C); bond strength (adhesion) at least 2.5 MPa (failure in the concrete); shear strength (7 days at 23 °C) at least 12 MPa; resistance to oils
Shelf life36 months from the date of manufacture; in intact factory packaging in warehouses at +5…+30 °C; do not stack pallets with components on top of each other
StandardsTU 20.16.40-049-38276489-2017 (identical to 2257-049-38276489-2017); STO No. 38276489.001-2017, STO No. 38276489.002-2017, STO No. 38276489.003-2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by CarbonWrap